Repair or install a new low-point valve or tank drain with this PEX valve fitting. The quarter-turn lever opens the valve to release water from your freshwater system for winterization or storage. Works with 1/2" PEX pipe.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Flair-it PEX drain angle valve fitting. This drain angle valve is gonna connect pipes and hoses in your RV fresh water plumbing system and allow you to control the flow of the water. This is going to work for repairing leaky connections or installing new lines. Will work with your PEX pipes, the old gray PB pipes and polyvinyl tubing. You can see we do have the two half-inch barbed connections that will fit your hoses and tubes with a half-inch inner diameter.
Having the barbed connections with the compression end here, it's gonna mean that you don't need any tools to get this installed. So basically the way this works, you'll just slide that compression end over your tube and then you'll get that barbed end inserted into the tube. And that might take a little bit of doing, might have to wiggle it back and forth and apply some pressure. But once you get that barbed end in, you can slide that compression end over and then get it tightened down. And that is gonna create a very solid connection for you.
I tried this out myself the other night. We had some spare PEX tube laying around, so I installed a very similar fitting. I was super impressed with how strong that connection is. So I was able to get it tightened down by hand. But then to get it removed, I actually had to use a couple vice grips.
So it was very solid. I think you'll be very pleased with it. One thing I will note is it can take quite a bit of force to get that barbed end inserted into your pipe. So I would recommend if you're gonna be working in a confined space, maybe try and get that fitting installed on your pipe before you get in that confined space so you have more elbow room to try and apply leverage to get that installed. But definitely can do by hand.
And it is going to give you a nice, solid connection. This is constructed of a polyoxyethylene construction so it is gonna be very durable and resistant to stress cracking. So it will hold up well and give you plenty of performance or longevity for a long time to come. Give you the ability to control that flow of your water just like you need. I do wanna point out, this is just one of the many connections that we have available here at etrailer.com. So if you're thinking through your project, think about what kind of connections you're gonna need to make, what kind of links of pipes you're gonna need. I would highly recommend you check out our other options, make sure that you're getting everything that you're gonna need for your project. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.