Flair-It PEXLock T-Connector Fitting - 3/8" Barb x 3/8" Barb x 3/8" Barb

Video Transcript for Review of Flair-It RV Fresh Water - PEXLock T Connector Fitting 3/8 Inch Crimp - FL24ZR

Hi, everybody. Andy here with etrailer.com. Let's take a look at this Flair-It PEXLock T-connector fitting. This RV freshwater plumbing T is going to connect pipes and hoses in your RV freshwater plumbing system. Whether you're needing to repair leaky connections or install new lines, this is going to work with your PEX pipes, PERT tubing and IATMO-approved polyvinyl pipes. The three three-eighths of an inch crimp connections with the three PEXLock clamps mean that you don't need any specialized tools to give you a nice, secure fit.

These reusable PEXLock clamps are installed with just a pair of pliers and can be removed with a screwdriver. Now, this is going to be a relatively easy install. To install these, you're going to slide the PEXLock clamp over the end of the pipe or the tube, and you wanna make sure that it's sitting flush with the straight cut end. And then, you're going to insert the fitting into the pipe or the tube, and you wanna make sure that it meets the positive stop on the fitting. And then, once you have that fitting fully inserted, you're then going to take a pair of pliers to squeeze together the two ears on the clamp until you hear a click (clamp clicking) or until the two ears overlap and engage each other.

So, it's going to be a very simple install, and of course, you'll do that with all three of the ends of this T. And once you have this properly installed, that connection is going to be very secure for you. On your screen, I am including a photo of what the installation is going to look like. We have been very impressed with how secure the connections have been on other Flair-It fittings. So, once you have this properly installed, you're not gonna have to worry about it.

It's going to be very secure for you. Now, as I mentioned, these clamps are reusable and this fitting is removable. To remove the fitting, you're just going to use a bladed screwdriver to remove the PEXLock clamps. You wanna be careful as you do that. And it might take some effort to actually pull the fitting out of the pipe or the tube because of that secure fit or secure connection that it had with those clamps.

So, it's going to be relatively easy to install, pretty easy to remove, and you're not gonna need any specialized tools. And this is a durable fitting. (metal tapping) It's reinforced to prevent any cracks from stress, so very durable and I think very long-lasting. Well, that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.