Table includes 1 leg that recesses into your RV floor with the included hardware. Stylish maple wood-grain finish matches the decor in your RV. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack.
Features:
Specs:
Need to replace or upgrade the old, warped dinette table in your RV? This wood-grain laminate dinette table provides you and your family with a level, durable surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, maple finish will look great with the decor in your RV.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water.
This dinette table will replace or upgrade the old, existing dinette table setup in your RV or camper. 1 Leg, 2 brackets, and hardware are included.
There are 3 white circles on the back of the tabletop, which give you a general suggestion for where to mount the leg. We recommend you install the leg onto the middle circle for the best stability, but you can install it anywhere along the internal steel mounting plate. This 30" x 10" plate will help improve screw retention for when you attach the leg to the tabletop.
Once you've chosen where you want to attach the leg, fasten one of the brackets onto the table. You will need to cut a 2-1/2" diameter hole in your RV's floor and then recess the other bracket into the hole. Drilling will be required. To finish, simply twist the leg onto both brackets.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this Recessed Mount RV Dinette Table. This is a single leg dinette table that will replace your previous RV table, or it can add a table to your RV's dining area for your friends and family to gather around, share meals or play games on those rainy days and that sort of thing. This does have the recessed mount here and that's going to fit into the floor. So when you remove your table, it's going to have a nice flush finish so you don't have to worry about tripping over that if you we're to be walking through that area, and that sort of thing.
So, that is going to give you plenty of room there. Once your table is removed, you won't have to worry about an unsightly bracket sticking up out of the floor. This table does come in three different laminate finishes to compliment your existing decor. The model I have here is the cherry. It's also available in maple and white, and you can see all three options on the screen there.
So you can kinda compare those colors to each other. So the difference between the maple and the cherry, they're both gonna have that wood-grain design, but the cherry is a little bit warmer of a color. That maple is a little bit lighter and more tan. As you can see here, little bit more of a close up, you can see that wood-grain design and that rich color of this cherry top. Underneath the laminate finish, we do have an ultra-strong, high-density EPS foam core.
So it is very solid, very durable, yet extremely lightweight. So, very easy to lift up your tabletop when you want to remove it so you can make up your extra bed or have more space for moving around your RV, especially if you have guests having a party, that sort of thing. You can have more floor space available. On the sides, we do have an edge banding that's gonna reinforce the table sides and seal moisture out. So it's gonna prevent the tabletop from peeling, cracking, or warping.
You can choose between the black trim like we have here for a nice high contrast look, or we also have a color matching trim, as you can see on the screen there. That's gonna be a little bit more closely coordinated with the top that you choose. So you've got those two options as well. We also offer this table in five different sizes. So this one here is 42 inches long by 30 inches wide. We also have them available and all those different finishes and with all those different trims in 36 length by 30 width, 38 length by 30 width, 40-inch length by 30-inch width. We also have our 42-inch length with the 30-inch width and your 44-inch length with your 30-inch width. So, all those options to make sure it's gonna fit into your dining space that you have available. So you just wanna make sure you're picking the right size for your setup. This table will have a single 2-inch diameter steel leg that's gonna stand on. This is gonna provide about 26 1/2 inches of clearance from the bottom of the table to the floor. We also have two-leg options available, so whatever works best for you. If you're replacing a two-leg version, you'd probably wanna go with that. This leg is going to use brackets on the top and on the bottom. So if I remove our tabletop here, you can see the base here that fits into the floor. It's going to be about 6 5/16 of an inch in diameter. I also have one separated here from another leg. And I can show you a little bit better how this is gonna look for you. So you can see, it is going to stick down into the floor a little bit. So you are gonna need to have a hole that is 2 1/2 inches in diameter for this to sit down in. So you wanna make sure wherever you're gonna mount this, you're not gonna be hitting your studs and that sort of thing. It's in your floors. You wanna make sure you'll have an open space that this can fit down into so that your leg can fit there. We also have your surface mounts available, but will stick up a little bit. The downside to that is potential tripping hazard, but that won't require you to drill a hole and you'll gain about 2 inches of clearance for your table, 'cause it won't sit down in that hole. It'll sit basically up on the surface there. So, depending on what's most important to you. We also have those available here at etrailer.com as well. This is gonna be very simple to get installed. We've got that other bracket on the bottom of the table here, and this table is going to have an internal 26-gauge galvanized steel screw plate in the center. So, it's going to give your screws something solid to grab hold of, to ensure a steady attachment no matter what size table you get. That screw plate is 30 inches long by 10 inches wide and it is centered on your table. And so you'll have that much room. You can see we do have stickers here that are suggested mounting points for new setups, but as long as you're within that screw plate distance range, you can mount the legs wherever works best for your application. You can see we do have screw holes in this one. This does not come pre-drilled. Those are just from our other videos and pictures that we've taken, just getting it set up for those. We don't recommend that you drill out the holes. We just screw in with the included screws, and it's gonna give you a nice steady hold, biting into that plate there. So, very simple to get that mounted wherever it's gonna work best for your setup. And then very easy to get attached whenever you are ready to have your table back up. So overall, a really nice, strong tabletop with a nice finish, gives you lots of options as far as color match, trim, dimensions to make sure it's gonna work for your setup. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.