SeaSucker Flex-X XL Phone Mount - 4-1/2" Wide - Vacuum Mount - Black

Video Transcript for Review of SeaSucker Phone Holder - Phone Mount Black - SEA98TR

Hello neighbor, Steve here with etrailer.com. Today we're looking at our SeaSucker Flex-X XL Phone Holder with the vacuum mount, and we carry in black or white. So folks, with these flex mounts, it's gonna let you mount your phone or maybe another small electronic or hands-free accessibility device on the go. Now they both feature the standard 4 1/2 inch wide vacuum mounted cup, and they both come with a hard plastic cover, that's gonna keep that mouth free of debris, grime, scratches, that kind of stuff. Now you can have it in black and white. You can actually take this articulated arm and fold it once it's attached to the surface any direction you want.

You can also unscrew that on both colors here you could do this. And there's another threaded spot here at the top, and you could screw it in that way. That way, let's say you want to mount on the wall here, and let's say you want to curve it this way, you could do that. So lots of flexibility, no pun intended, to do these. So I'm gonna go ahead and put it back the other way just so it'll sit up flat for demonstration purposes.

Now, as far as the suction part, I wanna show you that before I put the phone on here. Very simply, you take and you see the orange indicator here on your flat, non-porous surface, such as metal, glass, fiberglass. You just simply pump until all the orange disappears, and now you know that it's tight. And this thing can actually hold up to 120 pounds of force whenever it's vacuumed on there correctly. And if you see some orange, I just vacuumed it a little bit.

Just simply keep pumping as much as you can and it'll hold on for hours and hours and hours, days at a time, honestly, until this slowly lets air back in. Now to get the air back out, I'll take the cover off the white one so you can see a little better here. There's rubber tabs here and here under the pump on both the white or black. You simply push that in and that releases and lets air in to disconnect it from the surface. Now, I'll pull a phone out here that I have.

These rubber guys here are simply a little like corner edge, mine's got a case on already. But if you didn't have a case, it'd be a lot easier fit, a little better probably. So that goes on the case and it just acts like a nice rubber grip so it doesn't fall or rub. As far as the X grip itself here, we're looking at today, very simply, these are spring loaded, black or white, and you simply take your phone or small device, put it in there, and it's gonna hold it in place for you while it's mounted on the wall. Now again, you can mount this to the wall of the boat gunnel, the inside of a cargo trailer maybe, a vehicle, whatever you want, whatever kind of flat surface, and it's gonna hold nice and snug. And I'll put that back away. Now folks, again, we offer these in black and white. The black item number is SEA98TR. If you want the white model, that is item number SEA48TR. So again, we got it in black and white. A nice addition, made in the US. This is the SeaSucker Flex-X XL Phone Mount. Now folks, the arm length here is seven inches long, and overall, if it was flat including this top part, it's 11 inches from the ground to the top. So again, folks, this is the SeaSucker Phone Mount. Thank you so much for watching. Make sure you're double checking the item number to get either the black or the white. I'm Steven. Have a great one.