ARC Concept Custom LED Pod Lights - Fog Light Upgrade Kit - 40 Watts - 3" Round - Qty 2

Video Transcript for Review of ARC Off Road Lights - Concept Custom LED Fog Light Pod Light Upgrade Kit - ARC79RR

Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at these ARC Concept Custom LED Fog Light Pod Lights Upgrade Kit. These custom fit, durable and corrosion resistant LED fog lights deliver 3,000 lumens of dispersed bright white light to help you navigate inclement weather. As you can see, I already have these connected to power, and I have them turned on and you can just see how bright and brilliant they are with the studio lights on. But I'm gonna go ahead and turn my studio lights off here and go to a wide view.

And I wanted to shine one of these up here on the wall behind me to show you the 95 degree wide beam that is created by the total internal reflection, or TIR projector lenses. The high quality light output comes from four five watt Osram OSLON LEDs in each light, giving you a total of 3,000 lumens with 1,500 lumens per light. Now these are street legal pods, and they are SAE J583 certified for use on all roadways. However, you will still want to review your state's guidelines regarding the use of auxiliary lighting on the roadways. So let me go ahead and turn my studio lights back on.

My cameras don't necessarily like it when I turn the lights off. It doesn't focus real well. I'm gonna turn the power off on these lights and zoom in once again and talk a little bit about the housing on these lights. These lights feature a black powder coated aluminum housing and brackets that I already have installed here on these lights. They are corrosion resistant.

These are IP67 rated to protect against dust and moisture. And this is going to be a simple installation. They are going to install in your vehicle's factory fog lamp housing, and each lamp plugs into your existing fog light connector with the included adapters that you see here, and they are going to use your existing fog lamp on and off switch. Now, the overall dimensions here, let me pull out my ruler here, and I am going to give you the overall width, including the brackets that I have installed here. The overall width, we are sitting right at five inches wide and the overall height, we are sitting right at about three and three quarters inches tall.

And the overall depth, we are sitting right at the deepest point, right at about two and five-eighths inches deep. And that face diameter is three inches in diameter. And what you're going to get here with this kit is the two LED pods. And then you are going to get the Jeep type fog light brackets for each of the lights. And then I mentioned the adapters. You are going to get two 9006H10 adapters and two 5202PSX24W adapters. So whichever set of adapters will work for your application, you're going to get a set of each of those adapters, and then you're going to get the mounting hardware for the brackets, and I already have that hardware being used for the brackets. And then you're gonna get a set of Allen wrenches and just some additional information that you might find helpful. The wattage is 20 watts at 13.6 volts DC. So that's gonna be five watts per LED. The current is 1.5 amps at 13.6 volts DC. And the voltage is 10 to 36 volts DC. And the power draw is 1.5 amps per light. You are also going to get an instruction sheet showing you what's included and explaining a little bit about each of the pieces of this kit that you are going to receive. That's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..