Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2013 Ford F350 Super Duty Crew Cab, we'll be showing and installing the WeatherTech Front and Rear Mud Flaps, part number WT110020-120030. We've gone ahead and installed them on our passenger side. You can see how they match into the contours of the bodywork. This will be a no-drill install and either use existing hardware or provide the hardware as needed to install. They're more semi-rigid closer to the vehicle with more flexibility towards the bottom. From the bottom edge of the bodywork to the bottom edge of the mud flap, will be about 8" for the front and about 9-3/4" for the rear mud flap. Now let's show you how they install.
We'll start with the front. We'll go ahead and remove the factory fastener located here and here. To remove these screws, we use a 5.5mm socket. We'll go ahead and take our mud flap and put it up in position to make sure it fits around the bodywork. We'll reinstall our fasteners. We'll go ahead and run down our hardware just to take up some of the slack.
We'll still leave it loose so we can move around to install the last bit of hardware. Our hardware will be this stainless steel bolt with Phillips head, a stainless fender washer, a lock nut. Let's go ahead and run this through the bottom of our mud flap. Move around to run it through the existing hole in the bodywork and reaching from the top and going down. It's a little bit of an odd angle. We can install our flange nut. Now looking from underneath the truck, it might be a little easier to see what's going on.
Our screw is right here. The threads of our screw are right here. We'll run down and get started and we'll use a number two Phillips screw on the outside to tighten it down. With all our hardware loosely installed, we'll go ahead and tighten them down. I like to start with the ones on the outside first and then do the bottom one. When we tighten these down, we don't have to crush them, just where they tighten up and stop on their own.
Go ahead and give it the old shake test and firmly installed. It only took a few minutes to really install these. With the front mud flaps completed, we'll go ahead move on to the rear set. Forward passenger side, looking underneath the truck, facing out, we can see the fasteners that we have to remove. There are one, two, three, four plastic rivets that we have to remove and one small screw. On the plastic rivets, there's typically a small edge where you can take a flat screwdriver and work it inside of the center of the rivet. Once you have it loosened up, you can pull up the center more and then the whole rivet. If you have a trim panel tool, this actually works really good to pull the rivets out as well. Now to remove that screw, we used a 5.5mm socket. Next we need to go ahead and install our hardware for these holes right here. You see this piece of hardware right here They get replacements to cover up the holes that we're used by our plastic rivets. With the flat side facing out, it's nice and centered. Let's go ahead and install the rest of them. We'll go ahead and put this liner, let it fall back in place. We'll stack our new mud flap on top of it and install new hardware. Our hardware will be a new stainless steel screw and a flat fender washer. We'll just get it all started and then we'll tighten them down for good. Now with all the hardware loosely installed, we'll go ahead and tighten it down. We'll need a different size socket. We're going to use a simple 1/4" socket. We'll tighten these down. We don't have to crush them, just run them down so they naturally want to stop. Now that will finish it for, part number WT110020-120030, the Weather-Tech mud flaps on our 2013 Ford F350 Super Duty Crew Cab. .
Average Customer Rating: 4.8 out of 5 stars (1383 Customer Reviews)
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.The etrailer portion of the purchase was excellent. Weather Tech was lacking. Hence the 4 stars. The mud flaps fit perfectly, however they lacked the ability to count the number of screws, washers and clips,needed. Instructions for other than just the front mud flaps would have also been helpful. I am very handy and was able to figure out how the rear flaps went on as well as having the necessary screws to finish the project. Emily H. was very helpful in the ordering process. The order ship time was very good
High quality mud flaps that are very easy to install and are very sturdy. In all, it took me approximately 1/2 hour to do all four flaps. Living in a snow belt, these have helped tremendously with reducing the amount of wet and dirty snow sludge that would cake my running boards and rear dually fenders.
Quick to install and I like the durability of these. Just have to watch out for curbs as I like to back the truck into parking spots because I have a dually. I have put pressure on these because of a sidewalk, but they were ok.
Quick and easy to install. My wife tore the rear factory ones off. They are great looking to. The dually really looks great with the fronts on too. Thanks again.
I haven't installed them yet.
Perfect. Extremely fast shipping.
They went on easily and look great.
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Weather tech always fits and looks good
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.