Black matches everything, including your vehicle. If you are going for a simple look, it does not get simpler than this black license plate frame. When in doubt, go with the shade that will always get noticed, but never be questioned.
Features:
Note: Check your state's regulations before installing.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to be taking a look at the Neo license plate frame, black in color, part number CR15050. Now, this installation process will also apply to the Neo license plate frame, chrome in color, part number CR15030.This black license plate frame adds a lot to your vehicle's trim with a very simple design. It's engineered and designed to show off more of the license plate than most, and it comes in black so it pretty much goes with almost every vehicle. It's constructed of a durable, die cast zinc with a black powder coat finish, and it has a nice smooth look to it once it's installed.Because it shows a lot more of the license plate, it's not going to cover up the registration tag or any other important information. You needn't use the existing mounting hardware to install this. Now, there is hardware that you can buy sold separately that is standard or metric, and there's also screw covers available.
It should be noted that you should check with your state's regulations to make sure that this can be used with your vehicle.These license plate frames measure 12 and a quarter inches long by six and an eighth inches wide. Now, that we've gone over some of the features of this, let's go ahead and show you how they install.So, our first step is we're going to move the screws here from our previous license plate. We'll hold our license plate up. Insert it into our snazzy new license plate holder here. Then, we'll just kind of finger tight, put our screws back in place, and then tighten them down.
Now, these do come in a quantity of one. This person just happened to purchase two for both the front and the rear.
Average Customer Rating: 4.8 out of 5 stars (744 Customer Reviews)
Black matches everything, including your vehicle. If you are going for a simple look, it does not get simpler than this black license plate frame. When in doubt, go with the shade that will always get noticed, but never be questioned.
Met expectations
First impressions are important and etrailer delivered on all counts. The ordering process was easy, the email notifications were fast and informative and I am very impressed with the quality of the products.
I will definately order again.
Sturdy frame, and looks low key and gre at!
Great price, fast delivery, exactly what i was looking for!
The item I bought came today. It was out of stock when I ordered it but the folks at E-Trailer communicated well with me throughout the process. I am also one of their listed installers of trailer hitches. They have always been great to work with!
Gave the golf license plate to brother in law and is now being proudly displayed on his personal golf cart. All his golf buddies are envious. License plate was more than I expected. Great gift
Quality frame, heavy metal, not the cheap easy to bend stuff you see out there. I even bought a backup camera that goes between the top mounting holes. I just snipped the metal between the holes and the camera dropped right in.
Looks cool, but disappointed at how soon after install it began pitting, even with pretreatment of FluidFilm before installation....
Nice product,very durable/ long lasting as extremely stylish.
What a great licens plate frame a for boat trailer. After a year it still looks as good as the day I installed it.
High quality, provides a very clean look without covering any plate lettering.
Only problem I had was a slight delay due to understocking and manufacturer in China. It would be nice if the factory would bevel the edges so they're not quite so sharp. But, I've handled worse things than that. The mirror finish is flawless and I wouldn't think twice about ordering again. I think my pictures pretty much say it all. This truck is a 1998. Yes, it's eighteen years old!
This RAM license plate holder was just what was needed to replace the generic dealer
plate holders. They are made of a sturdy quality chrome plated metal, and have swing away RAM logos to cover the top plate mounting screws.
They are beautiful and make the truck look so much better. etrailer is a great place to get them from for both price and service.
Don't forget the fastener caps "CR82630" if your plate fastens at the bottom.
Plate frames look great on my new Durango. The front went on without a hitch, but the back frame had to be cut. There is a back up camera located where the top middle of the plate frame needs to mount. In short 3 inches of the top middle of the frame needs to be cut out in order for the product to work. If your good with your hand tools it's no big deal and still looks great but if your a person without tool skills it wont work out of the box, photo enclosed. I would give it a 5 star for looks and a 3 star to install on a 2014 to 2017 Durango with back up camera
I purchased the Golf Club license plate frame for my golf fanatic spouse. He loves it....ordering was easy, delivery was swift, and the license plate frame has held up extremely well 1 year later! He has received lots of compliments and I wholeheartedly recommend this product and this company!
I carefully chose from all the tropical license plate holders. This was the best looking one of palm trees. It looks just as advertised. I’m so pleased with this product.
I love it..... i will probably end up ordering more for my friends.
renee
I have an Arizona Highways Specialty license plate and love the slim rim license plate frame because it gives full visibility of the beautiful plate. I had to purchase another frame for my new vehicle. Thank you so much for the product and fast service. My husband and I both have slim rim frames.
I bought a pair of barbed-wire plate holders for my 2013 F=150. I got them at a really good price and they were delivered fast. I spray-painted them with antique rust-colored Rust-Oleum paint and they look awesome. I'm getting compliments right and left.
Fast shipping! Product came in tact. Packaging was really good. I’m from the islands and I love my palm tree license plate holder!
My new tribal license plate frames plus plastic cover shields really dress up our new Subaru turbo Outback. Easy to install. Very nice product. Thank you!
This frame was exactly what I was looking for. Its evenly thin edge all the way around my plate is super clean and non-obtrusive. The frame is as shiny as triple plated chrome, but shouldn't pit after 1 winter like my last frame because of its high quality stainless steel construction. It has a very flat surface and fits exactly as I hoped it would.
Hi-gloss finish matches chrome. Stainless steel should hold up to harsh Midwest winter, (and road salt); that will be the real test. The last "chrome metal" frame I bought was pitted and ruined after 1 winter, so that is why I stepped up to this one. This is a very thin frame with sharp edges, but otherwise nicely finished. Good bling factor.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.