Bestop Duster Deck Cover for Jeep Wrangler Unlimited - Black Diamond

Video Transcript for Bestop Duster Deck Cover Review

Today on our 2010 Jeep Wrangler Unlimited, we'll be installing the Bestop Duster Deck Cover for Jeep Wrangler Unlimited. Protect your cargo from the sun, rain, and dust with the Bestop Duster Deck Cover. It's the perfect addition to your bikini top or your windjammer. It simply attaches to the outer rail of your Jeep's body making it more aerodynamic and it could improve fuel economy. It seals off the rear of your Jeep from leakage and it also accommodates your seat belt and roll bars. It allows us easy access to our tailgate without having to remove anything. It's made out of a premium mildew and UV resistant fabric that maintains its shape in any temperature.

Now, that we've gone over the features, I'll go ahead and show you how to get it installed. First thing we'll need to do is completely remove our soft top, if you have one. We've actually got a bikini top here today, so it's going to work out just fine. You'll also want to remove that tailgate bar because we're going to need it to install that dust cover. I've got my dust cover laid out the way it's going to go on the back of the Jeep. We'll need to go ahead and take our tailgate bar here.

We've got this open channel on the back side here. We're actually going to take our dust cover, and on the back here, you'll notice this plastic piece here. We're just going to slide that on, just like that. Now, we can set the dust cover in the back of our Jeep. I'm going to go ahead and undo the hook and loop that goes around our roll bars. Then, we can bring it around to make.

To make it easy, I'm going to open up my tailgate and I'll set it in back, and then guide the fabric around where it needs to be. We'll take the plastic portion here of our dust cover and we're going to clip it on to the channel right here. Now, we need to make sure it's all the way slid forward, so with our bikini top tension strap, we can undo that for now. We'll just loosen it up and take it loose. Now, let's go over to the other side and do the same thing. Now with that in place on both sides, we can come back and reconnect our bikini top tension straps.

Just clip it on the bottom portion of the top there. It'll be fine, and pull it nice and tight the way it was. Now, we can just continue working our way around and tucking that plastic piece underneath the channel. We'll also want to be sure and connect our hook and loop here. We don't want it to overlap too much. We'll just connect it all the way around the roll bar, just like that. We'll come around the corner. As we keep working our way around, we can adjust our tailgate bar, and it's just going to sit right on top of the rubber padding here. With that in place, let's go ahead and finish connecting our channels here, just the same way we did before. We'll just continue working our way around towards the tailgate bar on this side. Now, ordinarily we have these brackets that are sitting on the end of our Jeep here that our tailgate bar clips in to. As you could see for this one we don't, so therefore, it's just going to rest on top. By having these connected like so, it's going to hold it in place, and we'll still be able to shut the tailgate. That's going to complete our install of the Bestop Duster Deck Cover on our 2010 Jeep Wrangler Unlimited.