If your tool box lid, bed cover, or boat hatch keeps closing when you need it to stay open, it's time to change your strut. Replace it with this universal fit gas strut and make your lid operate like new again. Quick, tool-free installation.
Features:
Specs:
Note: Always replace your struts in pairs, where applicable. Most lids, covers, or hatches have a strut on each side. Failure to replace both struts can result in a warped or damaged hinge.
Gas Strut with Exceptional Stability
Most gas struts consist of a tube filled with pressurized nitrogen gas, a piston, and rod. The Atlas Lift strut, however, has a dynamic damping groove inside the tube that regulates gas movement across the piston. This ensures your tool box lid, bed cover, or boat hatch stays open when you want it open and shuts slowly without bouncing or slamming. Lastly, in contrast to struts that only have gas in the chamber, a few drops of oil have been mixed in to help seal the piston and lubricate the rod. This allows your lid to move more smoothly as the rod travels in and out of the tube.
How to Find the Right Gas Strut for Your Application
Determining which gas strut is right for your application is easy. All you need to do is remove your worn-out strut and locate the force printed on the side of the tube:
Then, pull the rod out so it's fully extended and take the following measurements:
Additional Tips
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this universal gas strut lift support arm. This is going to replace one lift support arm on your truck cover, boat hatch, toolbox, or other application. This will extend it to help hold your lid or hatch open. So, you're not gonna have to worry about it slamming shut on you, catching your fingers, and potentially, other gear in as it's closing.
It will gently compressed while it's closing to give you a little extra support there. So, this is going to fit right onto your 10 millimeter ball fittings. Now, this does have the 10 millimeter nylon ball sockets here that are going to just simply click right in place onto those original fittings, give you a nice, secure connection. The overall length here from the center of one ball socket to the center of the other, we're right at 14 1/2 inches. Our compressed length is gonna be 8 11/16 of an inch.
So, our stroke here, we're looking at about 5 13/16 of an inch. This does have 37 to 47 pounds of compression force, which is about 164 to 209 newtons. This does feature a dampening technology that provides a nice, smooth operation to help eliminate your bouncing and jumping. So, this is going to ensure a frictionless movement in all weather conditions. Our steel shaft here does have a nitride coating that's gonna help resist corrosion.
We've got a black powder coat finish here as well that's gonna give it a nice, long-lasting performance. This does come with a limited lifetime warranty. So, if you we're to have any problems with it, you're more than welcome to reach out to us here at etrailer.com. We'll help you out. But this is gonna do a really good job.
You just wanna make sure that you are needing to replace that same length and about that same compression force, this will do a great job for you. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.6 out of 5 stars (14 Customer Reviews)
If your tool box lid, bed cover, or boat hatch keeps closing when you need it to stay open, it's time to change your strut. Replace it with this universal fit gas strut and make your lid operate like new again. Quick, tool-free installation.These worked fine during warm weather, however, when it got cold they quit working and would not hold nor lift the glass lid. These have been replaced with factory units.
just took longer then expected .
So far so good. We will see if they last another winter here in Colorado. The struts we have had in the past seem to fail in the winter time.
They worked perfect. Glad I made the purchase at etrailer
Great selection. Had what I needed. Quick delivery.
Very fast processing and delivery , just what I ordered . Highly recommend !
fast delivery
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.