Low Profile LED Strobe Light - Surface Mount - Submersible - 23 Flash Patterns - White LEDs

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378892801 Review

Speaker 1: Today I'm going to take a look at the six LED surface mount and low profile strobe light with the clear lens and the clear LEDs. Now this strobe light has a narrow five-eighths inch low profile, which will fit tight spaces like a front grill or a space between the rear bumper and the tailgate. Common use for this light is pick up trucks, utility trucks or construction vehicles. It has a black housing with a clear lens, clear LEDs, and the LEDs make great replacements for incandescent lights because they last 50 times longer. They're more efficient because they provide brighter light with less power output, and of course, no bulbs to replaces, no brittle filament.Now this light will offer 23 different flash patterns and a simultaneous or alternating function. It does connect using this blunt cut wiring connection.

Wire length on that is about nine and a half inches. It does have three wires. The black wire is your ground, the red is your power, and the yellow wire is used for synchronization and alternating flash. It is a surface mount design. It comes with all the mounting hardware you need and the brackets.

It's pretty nice because it's like a multifit. If you take these brackets, there's a couple holes. They put multiple holes back here, and there's three pins.You just line those up with the holes and you can use the bracket this way. You can use it that way. You can even use it that way just like that.

It gives you all the screws to install it. This light does need the IPX8 waterproof rating. It has six LEDs. The wattage on it is 13.7 watts. Voltage is 12 to 24 volts.

Amperage is 1.14 amps at 12 volts. The last thing I want to do is give you the dimension of this light and then we're going to hook it up to some 12 volt power so I can show you how bright they are and the flash patterns, some of the flash patterns. I'll do the overall length of it edge to edge.Five and one-eighths inches long. Depth on it front to back is about one and one-eighth inches deep. We mentioned the height five-eighth inches tall. Again what we're going to do is hook the 12 volt power up. We'll take the black wire for the ground. We'll take the red wire for the power. I'm going to turn it on this way and it'll show you how bright it is. Now the yellow wire what you do with that is . What I'm going to do is as we have the light on is I'm going to touch the red power wire with the yellow wire and that'll change the flash pattern so you can choose. Every time you touch, it'll reset it and give you a different flash pattern.The yellow wire is also used if you have multiple lights and you want to use them all synced together. You can hook the yellow wires all together from each of the lights. Once you get your flash patterns, it'll sync all the lights to that flash pattern. What I'm going to do now is turn on the 12 volt power and now you can see the clear LEDs and the clear lens. Then I'll go ahead and turn off the overhead lights just to show you how bright it is. Very bright for six LEDs. Now what I'm going to do, as I mentioned, we're going to touch the yellow wire. You can see as you touch, it'll change it to a different pattern.Touch it again gives you another pattern. One more time. Each time you touch it, it'll give you one of the flash patterns. I'll go ahead and turn back on our overhead lights. I'll go ahead and turn off our power. That should do it for the review on the six LED surface mount low profile strobe light with the clear lens and the clear LEDs.