To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring - no cutting, splicing or tapping required. Converter is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the rear bumper, on the passenger's side.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (44 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring - no cutting, splicing or tapping required. Converter is made using SMT to ensure superior performance.Looked just like the old one. Snapped right into the connector on my 2006 Kia. Very satisfied.
Plug & play
It came with my hitch, very quick shipping.
The hardest part was finding my car's socket and getting the oem cap off, after that it went fine.
I suggest getting the little plug in tester that fits the flat 4 plug, it makes quick work of verifying all is good to go and retesting occasionally thereafter before hooking up a trailer.
Blake A.
12/8/2017
A year on and no problems, works as should.Tip for free, keep the connectors greased up with dielectric grease to prevent corrosion.
when i go to get the tailor I'll be all set with the wright parts
Not sure, the last one shorted Outland had to drive 2 hours without brake lights
Easy installation. Perfect fit. The leads are quite long and you have to be careful that they are wrapped up out of the way when not in use may otherwise they may drag on the ground and get damaged. I'm not sure exactly what happened but this worked fine for 6 or 7 months. Now the left side trailer lights don't work properly. The Brake/turn signal light works as the tail light and the tail light is the brake/turn signal. I did damage the plug and am in the process of trouble shooting the problem. I plan on cutting off the damaged portion and splicing in an new plug. If this corrects the problem then I may replace the unit with a new one.
This item connected very easy and worked great.
4estgump
4/18/2023
It has been almost 3 years and it is still working great.
Couldn't be any easier to install.
The hitch was the correct one for the car, and the cable harness and receiver was correct also. Delivery was extremely fast: ordered on Wednesday, delivered on Friday.
All necessary parts were included, including instructions for torquing down the bolts.
I installed the hitch, 'without a hitch' on Saturday. It took about an hour, since I don't have any air tools.
All in all, I am very satisfied, and would recommend your company.
Thank you.
Very bad..one of the 4-pole ended uprising the one metal connector..I was refused a free replacement ...not very satisfied at all...
I am really happy with the wiring harness I ordered from you. Great price, fast shipping,and the auto tech had my vehicle in and out in 10 min. Thanks again.
This wiring kit was exactly what I needed, and was SO EASY to find, purchase, and install. It came with pictures on the instructions, as well as a tutorial video on the product page. So convenient!
Nice product, installed in literally 10 minutes.
Called my local NAPA, O Rielly and AutoZone first to try to get one same day but no one had one. etrailer.com had it in stock and cost was less than the others quoted me even with 2 day air I paid to have it by the weekend.
Plug and Play easy just had to add some additional Alienware as the double back adhesive and zip ties won't last long in Arizona.
Very easy to install and works great. I wish it came with longer zip ties as the ones in the kit are way too short, but that's an easy fix.
I enjoy shopping at etrailer because they always have what I need. And they have unbelievably fast shipping, and great prices!
Pricing and delivery of the wiring harness was excellent!
Excellent product that was packed great and shipped quickly.
Every transaction with this company have not only met, but exceeded expectations and best of price......that's the reason I'm a repeat customer. Thank you, Etrailer........:-)
Easy to install - accurate, easy instructions.
thats good you have a video how to install it
it was helpfull
when i install it
Good quality, easy to follow instructions, and easy install.
Got all parts together and put on car. Fishing here we come! Worked out great, and was simple!
Still works and looks great!
Part arrived ahead of schedule and was exactly what I wanted. I would highly recommend this company.
Wiring is still working fine
Super fast shipping and the kit plugged right in. Very happy with this purchase
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scot P.
2/5/2024
Snapped right into place. Perfect fit on my 2006 Kia Sportage.