TecNiq LED Boat Navigation Pole Light - 360 Degree - 36" Long

Video Transcript for Review of TecNiq Boat Lights - Navigation Lights - TN45XR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this technique, 36 inch tall white LED 360 degree all round boat navigation pole light. Now this is a 360 degree LED pole light that'll make your boat more visible when traveling at night, and the all round navigation lights will project a nice white light all around the boat, 360 degrees. I did wanna show you what that light looks like. I have it plugged into some 12 volt power. So if we turn on the power, you can see the light comes on.

Go ahead and turn off the overhead light. And with the overhead light off, you can see how bright that light is. Very bright light. Actually, if I zoom in just a little bit, you'll be able to see it a little bit better. But again, it gives off a 360 degree and this must be displayed at night, and in periods of poor visibility, meaning like fog or heavy rain.

We will go ahead and turn back on our overhead lights and we'll go ahead and turn off our power. This is a neat hinged pole design. You can see when you install this at the very bottom here, this will let you easily tilt and adjust the light as needed. Basically, if you just loosen the knob right here on the base, it'll loosen that pole and allow that pole to adjust. You can see to whatever angle you need for your application if you need it in a certain position.

Once you get that position, go ahead and just tighten that knob down. And once it's tight, you can see when it's mounted like that, it'll hold it in that position. Also at the very top, it does also move or rotate a little bit back and forth side to side. Now it does use a single premium LED, which is energy efficient, long lasting, and vibration resistant, and it meets every, all round light specifications. It meets the range, which is this.

You can see the slide for two nautical miles. It is a nice sealed, wet, waterproof unit, includes durable polycarbonate housing and a UV resistant lens. Does use military grade construction of the circuit board and it uses urethane potting, which will give you better protection than the common epoxy potting. The pole itself is a aluminum construction. It is 12 volt DC compatible and it is a surface mount installation. Let me just unhook it here. I can show you the base. The base on this, you can see it installs. It has the two holes in it, so you use two screws to install it. Now the hardware to install it is not included. We do sell that separately. This does hardwire to your application. You can see the white and the black wire they give you. It's wire length of about 18 inches. A few specs on the pole itself, the daint length on this one is 36 inches long. Diameter is three quarters of an inch. Now this is a 36 inch long one. It is also available in many other heights. We sell 'em anywhere from 12 inches long up to 48 inches long. Last measurement I wanna give you is the base. So if we measure the base on this one, it's gonna be right at two and a half inches by one and a quarter inches. And the distance between the two mounting holes center to center is one and three quarter inches. But that's gonna do it for the review on this technique, 36 inch long tall white LED 360 degree, all round boat navigation pole light.