Taylor Made Corner-Gard Fender for Pontoon Boats - Silver
(3 reviews)
Price: $36.57
In Stock
Taylor Made Corner-Gard Fender for Pontoon Boats - Silver
Item # 36931038
Retail:$211.36
Our Price: $36.57
You Save: 83%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3)
- Q & A (0)
- Videos (2)
- Photos
- Used (1)
Taylor Made Boat Bumpers - 36931038
- Pontoon
- Solid
- Silver
- 21 - 30 Inch Long
- Taylor Made
- PVC
Get some extra protection for the aluminum corners on your pontoon boat with this durable PVC fender. Silver color blends with your boat's aluminum trim. Flexible fender fits on rounded and sharp 90-degree corners.
Features:
- Corner fender buffers the aluminum corner of your pontoon boat to prevent damage
- Adds extra protection for your pontoon platform's aluminum edge
- Keeps piers, buoys, or other boats from hitting your pontoon platform
- Easy installation - bolts over your boat's existing aluminum corner
- Flexible design - easily folds to fit around both rounded and 90-degree corners
- Durable PVC construction is corrosion resistant
- Stainless steel mounting hardware included
- Silver color matches the aluminum on your boat
- Made in the USA
Specs:
- Unfolded length: 23"
- Folded length (per side): 12"
- Total width: 3-1/2"
- Total thickness: 2-1/2"
31038 TaylorMade Corner Guard Fender for Pontoon Boats - Silver PVC
California residents: click here
Video of Taylor Made Corner-Gard Fender for Pontoon Boats - Silver
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Taylor Made Boat Accessories - Corner Guards - 36931038
Ellen: Hey everyone, I'm Ellen here at etrailer.com. And today we're taking a look at the tailor-made pontoon corner guard in silver. So this is going to be an easy way to protect that corner on your pontoon boat whenever you go to dock so you don't have any sharp edges running into the edge there. It does fit on a 90 degree angle. So this can fold in and just mount right up over the aluminum on your factory guard rail there. So it can just mount over that.It has this little kind of channel already made in there to allow for a little extra clearance and then a cutout in the middle to allow it to come together in that corner shape.
So can be molded to fit whatever size corner that you have. And it also comes with the mounting hardware to get that attached. So we'll use one of our countersunk bolts, put the little collar, drop that down in there, and then place it through the mounting hole on either side.So easy way to protect your pontoon boat when you're out on the water. Oh, as far as dimensions, it is going to be 23 inches long from end to end. And then each corner, each leg of our corner is going to be about 12 inches long.You can see that, there about 12 inches.
And then the thickness of our guard is about four inches wide, or excuse me, about three and a half inches wide. The thickest portion of this is about two and a half inches to this edge right here. Our hardware is about seven eighths of an inch long from the head or where the threads start to the very end of the tip.Does come in this silver color and it is made in the USA. That's going to do it for our look at the tailor-made pontoon corner guard in silver. If you want to pick up any accessories to go on your boat or any other Marine accessories in general, you can find a lot here at etrailer.com..
Customer Reviews
Taylor Made Corner-Gard Fender for Pontoon Boats - Silver - 36931038
Average Customer Rating: 4.3 out of 5 stars (3 Customer Reviews)
Get some extra protection for the aluminum corners on your pontoon boat with this durable PVC fender. Silver color blends with your boat's aluminum trim. Flexible fender fits on rounded and sharp 90-degree corners.by: Gary07/29/2022
Installation was easy…it looked good. But it sags in the middle after a few months. Is there any fix?
by: Lynn 06/19/2020
Putting these on today. Look like they will be an excellent addition to the boat.
by: Jeff 11/14/2020
Shipping was very fast and the product was just what I was looking for.
3
3
See what our Experts say about this Taylor Made Boat Bumpers
Used Items Available
Condition: Missing Parts
Notes: like new other then missing screws.
Info for this part was:
Edited by:
Lindsey S
Video by:
Joshua S
Installed by:
Kathleen M
Installed by:
Evangeline M
Video Edited:
Dustin K
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/8/2022
I reached out to the manufacturer about the sag that you are experiencing. They advised that what you will want to do is reinstall the corner fender following the radius curve of the boat. You will want to use all four pre-drilled holes to re-attach it. This should correct the sag that you are seeing.