SeaSucker Waste Band Garbage Bag Holder - Vacuum Mount - 6" x 4" Opening - Black

Video Transcript for Review of SeaSucker Marine Boat Accessories - Waste Band Garbage Bag Holder - SS88FR

Hi, everybody, Andy here with etrailer.com, and today, we're gonna take a look at this SeaSucker Waste Band Garbage Bag Holder. This sturdy 4 1/2 inch vacuum cup mounted portable garbage bag holder is going to be great for using on your boat, it's going to let you dispose of waste on your boat while holding securely to most non-porous surfaces like your gunnels, sidewalls, bay tanks, and consoles. Now, this is made here in the USA and it's constructed of hard plastic, yet it's lightweight and it is going to be very durable. And this is going to be really easy to use, this opening is about 6 1/2 inches long and about 4 1/2 inches wide. And to use this, I'm gonna go ahead and zoom back out, and I have a typical size kitchen trash bag, might be a little bit smaller than your normal size one. So to use this, you're just going to run a trash bag through the hoop, and make sure you've got the majority of the bag hanging below the hoop here, and then just kind of roll the top of the bag over the hoop just like that.

And as you can see, it includes four clips here, and all you need is two clips to secure the bag, so I'm just gonna use those two, and then you have two extra in case you ever lose the clips. And so, as you can see, that's going to hold that bag really well for you. Let me zoom back in, so you can get a closer look at that. So you can see how those clips are going to hold that bag securely. This is going to accommodate garbage bags up to 13 gallons, so you're going to have quite a bit of flexibility.

So again, you're not gonna have to worry about that bag slipping out, because those clips hold it very securely, and so, it's gonna make it very easy then for you to clean up the inside of your boat, or just have a trash bag mounted wherever you need it for ease and accessibility. Now, I do wanna mention, you do wanna hold on to your vacuum cup cap, because when you are not using this, you wanna make sure that you have that vacuum cup covered just to protect it when it's not in use. So make sure you don't throw that away when you take that off, you do wanna keep it for when you're not using this mount. Now, this is going to install and detach literally in seconds. And so, to attach this, it's gonna be very simple, you just wanna make sure that you clean the mounting surface and the vacuum pad if needed, and I went ahead and made sure that this surface was nice and clean.

Though it's probably a good idea as well to apply moisture to the sealing edge of the SeaSucker, and then you do wanna make sure to test the SeaSucker to see if it deforms surfaces with soft coatings, and then when you're ready to mount this, you want to position the mount, so this orange band will be visible. And if your SeaSucker happens to lose vacuum while in use, you'll begin to see this orange ring, and that will let you know that you need to pump this up a few times to add more suction to that cup. So again, this is going to be very easy to use, this surface is like a hard plastic surface, so this is not porous in any way, so this is going to be really good for our demonstration purposes. So I'm just going to give this a nice firm push, and then I'm gonna begin to pump the plunger here and keep pumping until you don't see any more orange, and as you can see, the orange is completely hidden, so that means we are nice and secure. Let me zoom back out again and just show you that is going to hold very securely, and this has a pull rating up to 120 pounds, so I'm not gonna have to worry about this mount going anywhere.

And again, this is gonna be perfect on a boat, especially if you're getting rock back and forth by waves or things like that, this is going to stay in place and you're not gonna have to worry about it accidentally coming undone or anything like that. So like I said, if that orange band begins to appear over time, like if you have this mounted over a stretch of time, you might begin to see that orange band appear. If so, you just give it a few pumps, and that will continue to hold it firmly in place. I did want to pull out my ruler here real quick. Obviously, you're probably not gonna have it mounted like this, it's probably gonna be more like this, but for our demonstration purposes, it was easier just to kinda have this laid down on our table here just to show you how to install this. But I do wanna show you how far this is going to extend from the surface, the surface that you have it mounted on, so we're sitting right about 7 1/2 inches that this is going to extend from the mounting surface. And then to release this, it's gonna be very easy, we have release tabs here, and so, you're just going to push against those tabs, and then it comes off just that easily. And then I'm gonna go ahead and replace this cap to protect that cup, and then you can put this in storage, and then it'll be ready to use the next time you need it. Now, this does have a limited lifetime warranty from SeaSucker, and obviously, this particular version is in black, but we do also offer this very same one in white as you can see there of on the top of your screen, and if you're interested in that white one, I do have our item number for that white one on your screen. And we also have this in a slightly larger size as well, and if you're interested in taking a look at that larger one, I'm also including our item number on your screen for you if you're interested in taking a look at those other options. You can just take those item numbers and put it in the search field of our website, and that will take you to the one that you are looking for. So if you are looking for a convenient, portable option to mount a trash bag on the inside of your boat or really anywhere else where you have a surface that's not porous and you wanna make sure that it's going to hold securely in place, this is gonna be a great option for you to consider. Well, that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.