Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Performance Tool Electric Blower with the heating element. Now this blower is a durable ABS construction, has a nice built-in carrying handle. The heating element that's attached to the front is metal, and it's included to convert the blower into an efficient 1,400 Watt area heater. Again, it easily attaches to the front of the blower, plugs directly into the receptacle on the blower, and you have this lighted power switch right here. This will move up to about 300 cubic feet per minute, can set it in three different positions, straight like that, you can go back, or you can even go further back to shoot it straight up. It does have a variable rheostat on and off switch right here that allows precise speed control.
Just click it on, and as you rotate it, it'll go up to maximum heat, or maximum speed, and as you turn it down it'll slow it down, or you can completely turn it off. Does have an overload reset switch right back here. Does have two built-in 15 Amp grounded outlets, one over here, one over here that the heating element's plugged into. Has an 8-foot long three-prong grounded cord. Total weight on this is about 9-1/2 Lbs.
and a nice feature on this, this heating element can be removed, and you can use this as a standalone blower. There's just a clip down here that you unclip, just raise up to remove it, unplug it from the blower and you can set your heating element aside, and then you can use this as a standalone blower. Same way, you can put it in different positions. And you can use that to dry wet carpet, floors, paint, and other surfaces. And then when you want to use it again as a heating, put the heating element back on, just hook that clip down, put it on this, rotate it down, and then just pop the clip right on there to hold it into place, and then over here just go ahead and plug your three-prong plug into the outlet.
Then you're all ready to go as a heater.That should do it for the review on the Performance Tool Electric Blower with the heating element.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.