Flare Tool Set with Flaring Bar, Yoke, and Double-Flare Dies - 7 Pieces

Video Transcript for Review of Performance Tool Tools - Brake Line Flare Tool - PT66ZR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this seven-piece flare tool set. This is going to allow you to flare or double flare your 3/16 inch up to half-inch thin wall steel; aluminum, or soft copper tubing for your brake lines or other applications. We are going to get the flaring bar, the yoke, and five of these double flaring dyes. So that's gonna bring us up to our seven pieces. This is going to work with your 3/16 inch, 1/4 inch, 5/16, 3/8, and half-inch tubes.

And the dyes will match those same diameter. So very easy to use and operate. You can just have a half-inch wrench to tighten the bar down and to operate our anvil here, and just easily undo that. Slide your bar in place with your tubing connected. Then you'll be able to flare and/or double flare as needed.

This all comes in this convenient storage case so that you can keep all your parts organized so you know where it's at the next time you need it. Very easy to use and operate. They also include instructions on the back of the packaging with diagrams to help walk you through the process if you're not familiar so that you can do it yourself. So very convenient little kit here. The little case pretty compact.

So you can just have this sitting in a shelf until you need it for the next time. So if you are considering doing some brake line work, this is a nice piece to have to make sure that you have those flares or double flares on your brake lines. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..