Keystone Single Jack Coaxial Connector for SmartPlug Data Port Inlet - Qty 1

Video Transcript for Review of SmartPlug Marine Power - RV Power Inlets Coaxial Connector - SM76MJ

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Keystone single jack coaxial connector for the SmartPlug data port inlet. This is for a quantity of one connector. Now this one is a single coaxial Keystone jack connector designed to snap into your SmartPlug data port inlet, and it provides reliable connection for data transmission. Now, I did wanna demonstrate, if you're not familiar with the SmartPlug, this I happened to pull, this is the SmartPlug data port inlet. You can see this would be installed on your RV.

And you can see you open the cap there and you'll see two openings that you can put your connectors in. This one has a plug in it, so the other one is open. So what you can do, the way this installs is this one's a coaxial connector. You just go in the back here, set it in there, and then go ahead and push it in. And you can see when you pop it in there, now you have a coaxial.

If you have another connector, they do sell other connectors that you can put in there and which'll put it to whatever your application is. This one here with the coaxial allows you to hook up your TV or internet cable in your boat or your RV. And as we mentioned, there's additional connector ports that you can purchase so that you can mix and match to customize for your SmartPlug data port inlet. And I happen to have those, I happened to pull 'em just to show you. They also offer a ethernet connector that can be popped in there if you need to hook an ethernet cable up.

They also offer a HDMI connector that can be inserted in there. They also offer a USB connector that you can pop in there, and also USB-C connector. And all those connectors, we do sell separately on the website, and they are listed at the bottom of the product page for this connector to show you what is available. And again, if you need to add one, you can just pop out the plug and then you can add another one just in there. If there's not one in there, it's a good idea just to go ahead and put the plug back in there.

And then to remove it, just push down, pull up on it, and it pops right out just like that. So it's very easy to install, very easy to remove. But that should do it for the review on the Keystone single jack coaxial connector for the SmartPlug data port inlet.