Summer Starts Here - Save up to 70%
Replaces the clutch assembly for your Air-Flo, Henderson, Swenson, Hi-Way, Meyer, Fisher, Western, Hiniker, Ogora, Boss, Monroe, Down Easter, or Torwell salt spreader. Mounting bracket included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the replacement snowplow spreader clutch assembly for one inch shaft. Now, this is going to be a dry electric magnetic clutch, so basically that just means that the friction service and gag must be kept free of grease and other contaminants in order to work properly. Just want to make sure that there's no friction there.It's going to have the two wires coming off of our clutch assembly. One with the male terminal end and a ring terminal. This is going to replace your electromagnetic clutch on your snowplow assembly system.Now, this is going to have a rating of 12 volts DC, and the rated power is going to be about 45 watts. The torque is going to be about 80 newton meters, so it's going to be a high torque clutch.
As far as the dimensions, overall it's going to measure 5.9 inches at the widest point. This step in is going to be 4.5 inches across, and then the smallest point is going to be three inches in diameter.Again, that inner shaft is going to be one inch in diameter. It's going to have these mounting holes onto the side. That's going to measure from the center of the shaft to those mounting holes, that will be 3.85 inches or about 98 millimeters. The distance between those two holes is going to be three quarters of an inch.
The overall height of the assembly is going to be 2.6 inches.That's going to do it for our look at the replacement snowplow spreader clutch assembly.
Average Customer Rating: 4.8 out of 5 stars (4 Customer Reviews)
Replaces the clutch assembly for your Air-Flo, Henderson, Swenson, Hi-Way, Meyer, Fisher, Western, Hiniker, Ogora, Boss, Monroe, Down Easter, or Torwell salt spreader. Mounting bracket included.You should be able to sell a million of these. This was used on the "Curtis Fast-Cast" sanders that were made for them by Torwell Mfg.who has since gone out of business or reinvented themselves or some such foolishness and neither Curtis Industries nor Torwell is willing to support those units. This took a bit to find but is is the EXACT unit!
We received it in a very quick manner. Even around the holidays!!!
Thank you!!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.