Peterson Nightwatcher H3 Halogen Replacement Bulb - 55 Watt

Video Transcript for Review of Peterson - Emergency Supplies - VH550

Today we're going to take a look at the Peterson 55 watt Nightwatcher H3 halogen replacement bulb. Now this replacement halogen bulb fits the Peterson amber warning light bar, which we do sell separately on our website. They come in a part number 761A or 761MA, and again both of those light bars we do sell separately on our website. Now this bulb can also be used to replace any halogen auxiliary light that uses an H3 bulb. It will fit both blade and bullet terminals. As you can see the wire that comes out as a blade connection on it, if you want to use it in a bullet connection, they offer this adapter that you just plug into the blade and then you can plug it into a bullet terminal.This is for a quantity of one bulb.

The bulb type is H3, voltage is twelve volts and the wattage is 55 watts. And one note, when you're handling these bulbs, you always want to handle it by the base. You don't want to get any of the grease from your hand onto the glass portion because then if you end up hooking the bulb up and turning it on, lots of times that oil that's on your fingers will cause that bulb to burn out. So what you want to do is always handled by the base. Now if you accidentally happen to touch the glass with your fingers, they recommend just using rubbing alcohol to clean it.

But that should do it for the review on the Peterson 55 watts Nightwatcher H3 halogen replacement bulb.