Replacement Insulated Cover for Goal Zero Alta 50 Portable Electric Cooler

Video Transcript for Review of Goal Zero Replacement Cover Alta 50 - GZ66YR

Hello neighbors, Steve here with etrailer.com. Today we're looking at replacement insulated cover for the Goal Zero Alta 50 portable electric cooler. That's right folks, this replaces the insulated cover for your Goal Zero Alta 50 electric cooler that's sold separately. Item number GZ86YR. You can find that here at etrailer.com. This will protect the cooler from scratches and dings and it does include integrated exterior pockets and cutouts for the screens and things.

And I'll show them here in a second. First, I wanna throw up an image here of what this looks like on the cooler. So you've got the clear screen there in the front. You can see the user pad behind there. And you've got the two pockets with the hook and loop fasteners, the lid unzips and zips, the D-rings, and all the mesh on there as well.

And I'll show you that now in person. So again, starting at the front, you got the hook and loop lid. Keep in mind I don't have the cooler obviously, so I'm gonna keep this zipped up so it don't fall apart. But you can see the reflective insulation that's built in there. And this stuff I would say is at least a quarter inch thick, if not a little thicker, that insulation.

You've got the two hook and loop pockets up front. They're roughly, I don't know, four inches by eight inches, something in that nature. I have not measured them, but my fist fits in there pretty big and I'm a pretty big guy, as you can see. You got the clear cover here for the instrument panel, like I showed you on the image, all the mesh. The D rings here for tying it down if you wanna tie it down whenever you're using it, the hole over here on this side for the plug, the mesh screen for ventilation, and you got the cutout here for the handle.

It's a simple hook and loop. Undo that, open it up, the handle will come out, hook and loop it back together. Now the handle's on the outside. You can see that zipper runs all the way down here. So from the front all the way down. You got the cutouts on the back here for the hinges, and the mesh once again, so that pump and compressor can breathe on the cooler. And the other side, same thing, the electrical connector port hole cut out and another hook and loop here for the handle as well. So now that I've shown it to you, lemme go ahead and verify here, show you the lid, rather. Again, you can unzip it, come around to the other side, unzip it, open the lid when you wanna use the lid or unzip it completely to then take it on the road. You know, like flat for storage. On the bottom you've got one single hole here, that is for your drain plug on the bottom of the cooler. You also have a rubberized bottom base that's gonna help it from scooting around and stuff when the cooler's in there as well. And again, now you can kind of see better that insulation, reflective insulation in there as well. So once again folks, this is the replacement insulated cover for the Goal Zero Alta 50. I'm Steven. Thanks for looking with me and have a great day.