These easy-to-mount brackets let you install a spotlight, antenna, or other accessory that mounts with a single bolt. Brackets install on the front, side, or rear profile channel with included hardware. Black powder-coated steel resists corrosion.
Features:
Specs:
Note:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look, at this Front Runner accessory bracket set. These brackets, we're gonna have two of them. They are going to allow easily mount onto your Slimline II platform rack, and allow you to very simply install spotlights, antennas, or other accessories that mount with a single, one half inch diameter bolt. So if you have a spotlight, or something that uses a half inch diameter bolt, we'll mount right through there. And then this will give you that mounting location on your Slimline II platform racks, that you can use those spotlights or other accessories.
Now these will install on the front, the side, or your rear profile channel, with the included hardware that's included here. And these brackets do tilt. So you've got quite a range of adjustability here. So, you can see we can sit, get it mounted in the zero degree position, and just take out that bolt, get those holes lined up, pass it through like that, so we can have it mounted straight up. We can have it mounted out at a 45 degree angle.
We pass it through there, and we'll hold it there. And then we can also mount it in the 90 degree angle like so. And then we can also flip it over. So if we're needing an angle pointing down, we can have it going in any of those same orientations, in the reverse orientation. This does have a stainless steel construction, with a black powder coat finish, so it is going to resist corrosion, hold up well, Do a great job for you for a long time to come.
Give you a nice solid connection there. The dual mounting points, are gonna help reduce your vibration, and help prevent any damage to the accessories that you have mounted here. Now, out of the box, this is gonna work for your Slimline II platform rack, but it can also work with your Slimsport platform racks. and Slimpro van racks, if you add on the side mount accessory bracket that you see listed on the screen there. So if you do have either the Slimsport platform rack, or the Slimpro van rack, you will need that.
That is sold separately, but that will allow you to use this bracket set. You can also use this with the original Wind Cheetah Slimline platform rack, but you will have to do a little bit of drilling into the rack, in order to get these mounted in place. So if you are needing to mount a spotlight, antenna, or other accessory, with that half inch diameter mounting bolt, this is gonna be a great way to go. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.