Replacement Inflator and Gauge Kit for Firestone Air Command I Xtreme Duty Compressor Kit

Video Transcript for Review of Firestone - Vehicle Suspension,Air Suspension Compressor Kit - F2435829195

Today we're gonna take a look at the Replacement Inflater and Gauge Kit for Firestone Air Command 1 Extreme Duty Compressor Kit. This is going to be a direct replacement from Firestone for your inflater and gauge. This allows you to run some air off of your airbag and compressor system from your Firestone Air Command 1 Extreme Duty Compressor Kit.Basically, if you wanted to air up your tires, or another accessory off of your compressor kit this would let you do so. This is going to be a replacement for the kit that came with your Air Command 1. Now, this does not come with the external hose for this, so you will need to reuse the one that came with your kit, but it'll have all of the same features. We'll have our tire inflation valve here with that chuck on the one end.

And then the other end will connect into our system using that hose and the adapter on the end to run into our external valve stems.We'll have our release for that, so we can get our air in. And then we also have the re-release for our gauge as well, so whenever this is full of air and you want to reset it you'll hit that little reset button on the side, or that'll also let you let air out of the system. This lets you let air in, let air out.Again, this is going to be a direct replacement for your Firestone Air Command Extreme Duty Compressor Kit. That part number is going to be F2543, so if that was your kit this is going to be a replacement for that.As far as any dimensions, our gauge itself is gonna be about 2 1/4 in diameter. That inflater is gonna be about 7 1/2" long overall.

From end to end, it's gonna be about 19 1/2". But it does fold over pretty nicely, and whenever it's folded it'll just be about 9 1/2" long.That's gonna do it for our look at the replacement Inflator and Gauge Kit for Firestone Air Command 1 Extreme Duty Compressor Kit.