ARC Xtreme LED Light Bar - 20,400 Lumens - Spot/Flood Mixed Beam - Double Row - 30" Long

Video Transcript for Review of ARC Extreme Series LED Rally Light Bar - ARC93RR

Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this ARC Xtreme 30 inch long LED mixed beam light bar. Now this is a nice off road LED light bar, shines a nice bright white mixed spot and flood beam so that you can see the trail at night or in bad weather. That combination beam increases your visibility in front of you and off to both sides. The spot beam distance, which would be in front of you is gonna be 2,263 feet.

The flood beam width is gonna be 229 feet. This does offer 60 LEDs which provide 20,400 lumens of light. And I do have this hooked up to some 12 volt power just to show you how bright the light is. So if I go ahead and turn the power on you can see the light turn off the overhead light and you can see how bright it is. Gives us a very large area.

As we mentioned, it's both a combination spot and flood beam. Then turn back on our overhead lights, turn off our power. Now this does use a durable polycarbonate lens it's impact and shatter resistant. And that housing it's in you can see is a nice black powder coated aluminum housing. This will help resist corrosion, dissipates the heat.

Does have an IP 67 rating to protect against dust and moisture. And it is a pretty simple installation. You can put it on your roof your row bar, grow guard, or bumper. It includes both mounting options, the side and bottom. Now I've installed 'em on here just to show you both options.

You can use 'em combined or separately but here's your side mounting brackets one on each end and then your bottom mounting brackets that you can adjust. Now, this is a 30 inch long light. It is also available in a 20 inch length. We do sell that separately on our website. These mounting brackets that are installed on here are adjustable. So you can change the angle of the light as needed. Now this does require a wiring harness to connect this light to your battery. We do sell that part separately on our website. Want to pop that up, just to show you as an insert. It shows the wiring harness that we sell that works with this. And basically that wiring harness, they just unhook this one and you can see the end of the slide has a two pin Deutsche connector so that harness will plug right in there. And then you attach it to your battery to supply the power. Now, this is intended for off road use only. This light does not meet the DOT or the SAE standards. This is for quantity of one light bar. The lumens again is 20,400 that mentioned the total LEDs. There are 60 of 'em it's six watts per LED. So the wattage on the slide is 360 watts at 13.6 volts DC. Last thing I'm gonna do is give you some dimensions on this. So if we do the length one end to the other is right at 32 inches long total depth of the light front to the back is about two inches deep. And the overall height I'm gonna first measure just the light bar, not including the mounting brackets. So just the light bar height is gonna be right at about two and 13, 16 inches tall, just under about three inches. And if we do the whole, including the mounting brackets up to the height, three and a half inches tall. But that should do it for the review on this ARC Xtreme 30 inch long LED mixed beam light bar..