ARC Concept LED Pod Lights - 40 Watts - Flood Light - Flush Mount - 3" Cube - Qty 2

Video Transcript for Review of ARC Off Road Lights - Vehicle Lights - ARC49RR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the ARC Concept three inch cube flush mount LED flood lights. It's for a quantity of two. Now these lights are street legal LED flush mount flood lights that'll produce 3000 lumens, which is 1500 per light and it gives a focus light for improved visibility and safety. The high quality light output comes from four, five watt LEDs per light, and they use 120 degree wide beam which will increase side to side visibility. And the TIR projector lenses produce a nice clear wide beam.

Now I do have this hooked up to some 12 volt power to show you how bright the lights are. So I'm first going to do is we're gonna zoom out since they're pretty bright. Now go ahead and turn the power on and with the power on, I'll go ahead and turn off the lights and you'll be able to see how bright these are. You can see they are a flood light design so they do light up very large area. It is a bright white light.

Okay, we'll go ahead and turn off our power. Turn back on our overhead lights. Now these are street legal pods. They are SAEJ593 certified as reverse lights for use on all roadways. They do use a durable polycarbonate lens which is impacted shatter resistant.

And the housing these lights are in, you can see are a black powder coat aluminum housing. These will resist corrosion and help dissipate the heat. They do have an IP 67 rating to protect against dust and moisture and they are easy installation. It comes with all the hardware you need, you can see laid out here on the table. Comes with the two cube LED pods, the two flush mounted pads that will go on here when you flush mount them, and then the mounting hardware to install them.

These are a three inch square compact light that will flush mount to your bumper or other flat surface. Mention the foam gasket right here ensures a nice, proper seal and snug fit when you install them. Now, these do require a wiring harness to connect to these lights to your battery. Now that wiring harness, we do sell separate on our website. It's part number ARC86RR. Just want to pop up an insert and show you. There's the harness that we sell separately that works with this. And as you can see, it has two plugins that'll plug into the back of these lights and then you attach it to your battery. And then it also comes with a rocker switch which will allow you to operate the lights turning them on and off. Now, a few specs on this. It is for quantity of two pods. Again, the lumens we mentioned is 1500 per light. So 3000 total for both of them. And again, four LEDs per light at five watts per LED. Gives you 20 watts at 13.6 volts, DC per light. Last thing I wanna do is just give you some dimensions on this. So if we measure the overall width three and a half inches. Overall height, three and a half inches and the total depth from the back to the front, right at two and five eighths inches deep. But that should do it for the review on the ARC Concept three inch cube flush mount LED flood lights..