ARC Concept LED Pod Lights - Fog Light - 20 Watts - Flush Mount - Yellow Lens - 3" Cube - Qty 2

Video Transcript for Review of ARC Off Road Lights - Vehicle Lights - ARC39RR

Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the ARC Concept three inch cube flush mount LED fog lights with the yellow lens. And it is for a quantity of two lights. Now these are a flush mounted fog light which will deliver a nice, bright yellow light to help navigate in inclement weather. The yellow tinted lenses on these maximize your visibility in fog and rain.

Now, these are street legal LED fog lights. They'll produce 3000 lumens, which is 1500 per light and it gives you a dispersed yellow light for improved visibility and safety. It is a high quality light output from four, five watt LEDs per light. And it has a 95 degree wide beam which is created by the TIR projector lenses. Now I do have this hooked up to some 12 volt power.

I do wanna show you the yellow light and the beam. So if we go ahead and turn our light on. And then we'll go ahead and turn off our overhead lights and there you can see the yellow tint to the light. And again, it is a fog light design. I am gonna zoom out.

So you can also see, when I turn around to the back wall just to show you how they are a wide yellow tinted light, a very bright light. Go ahead and turn off our lights. Turn back on our overhead lights. Now these are street legal pods. They are SAEJ583 certified for use on all roadways.

They do have a nice durable polycarbonate lens on them, which is impact and shatter resistant. And the housing that they're in is a nice black powder coated aluminum housing which will resist corrosion and also dissipate the heat. Has an IP 67 rating to protect against dust and moisture. And this is very easy installation with the included components. I got them all laid out here on the table. Basically it includes these two cube LED pods, the two foam mounting gaskets. When you go to a flush mount these, you put these on to help seal it. And then the mounting hardware to install it. They are a nice three inch square, compact light and mounts to the bumper or other flat surface. Now to install this, it will require a wiring harness to connect this light to your battery. We do sell that wiring harness separately on our website. It's part number ARC86RR. So to pop up an insert, there is what that harness would look like. If you notice it has the two connectors that'll plug right into both lights. On the other end it has the two lead wires that'll connect to the battery and it even includes a rocker switch so you'll be able to turn your lights on and off as needed. This is for two quantity of two pods. Again, the lumens is 1500 per light. So 3000 total. It's four LEDs per light at five watts per LED. So that's gonna give you a wattage per light of 20 watts at 13.6 volts DC. And then the last thing, if we zoom in to give you the measurements on these lights. The width on them, three and a half inches, height is three and a half inches. And the total depth is right at about two and five eighths inches deep. But that should do it for the review on the ARC Concept three inch key flush mount LED fog lights with the yellow lens..