Locknut for Suspension Spring-Eye Bolts and U-Bolts - 5/8" Diameter - Zinc Plated
(3 reviews)
Price: $1.58
In Stock
Locknut for Suspension Spring-Eye Bolts and U-Bolts - 5/8" Diameter - Zinc Plated
Item # 6-38
Our Price: $1.58
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (3)
- Q & A (0)
- Videos (1)
- Photos
ABS Fasteners Accessories and Parts - 6-38
- Trailer Suspension Parts
- Hardware
- Nuts
- ABS Fasteners
- Suspension Nut
- 5/8 Inch Diameter
5/8" Diameter locknut is designed for use with spring-retainer bolt (7-181 - sold separately) or a U-bolt (11-64 or 11-77 - sold separately).
Features:
- Locknut secures a suspension bolt on your trailer
- Designed for use with spring-retainer bolt (7-181 - sold separately) or U-bolt (11-64 or 11-77 - sold separately)
- Nylon insert reduces vibrations between the nut and a bolt
- Zinc plating is corrosion resistant
Specs:
- Diameter: 5/8"
- Threads per inch: 11
- Quantity: 1 locknut
62CNRH0Z Nylock Nut for Suspension Spring-Eye Bolts and U-Bolts - 5/8" Diameter - Zinc Plated
6-38 Locknut for 7-181 Spring-Eye Bolt, 11-64 or 11-77 U-Bolt
Video of Locknut for Suspension Spring-Eye Bolts and U-Bolts - 5/8" Diameter - Zinc Plated
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of ABS Fasteners Trailer Leaf Spring Suspension - Locknut - 6-38
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this five eights-inch diameter lock nut for the suspension spring eye bolts and U bolts. It has a zinc platting. Now this lock nut here will secure a suspension bolt on your trailer. This one is designed for use with the spring retainer bolt part number 7-181, which we do sell separate on our website. Or if it's the U-bolts, part number 11-64, or 11-77.
Also sold separately on our website. Now this does use a distorted thread to lock it. This will reduce vibration between the nut and the bolt. Does have a zinc platting, which is corrosion resistant. And I did happen to pull the part number 7-181 bolt, suspension bolt, which is this one.
And you can see how this would screw onto the end. And it stops, because one of the threads in there is distorted, and then as you tighten this down, it'll lock it into place. Again, the diameter fits a five eighths-inch diameter bolt. The threads per inch is 11 threads. The head size on this is 24 millimeters, or 15 sixteens of an inch.
And it is for a quantity of one lock nut. And the way you can tell it is a lock nut, if you look on the side, you'll see circles, that designates that it is a lock nut. But that should do it for the review on the five eighths-inch diameter lock nut for the suspension spring eye bolts and U bolts.
Customer Reviews
Locknut for Suspension Spring-Eye Bolts and U-Bolts - 5/8" Diameter - Zinc Plated - 6-38
Average Customer Rating: 4.0 out of 5 stars (3 Customer Reviews)
5/8" Diameter locknut is designed for use with spring-retainer bolt (7-181 - sold separately) or a U-bolt (11-64 or 11-77 - sold separately).by: James01/08/2019
Even before I get to the review form I want to tell you I was "blown away" when I got a notice a very few hours after ordering that it was shipped.
Lori (I think her name is) was very helpful with wisdom about tires and searching for some hardware we couldn't exactly match but found some good enough. Gave me her number at end of first call in case I needed any more help and I did.
All arrived before noon. Over the years I have noticed that tire quality is often approximately reflected in visible details like the fit of the mold segments, amount of flash, the surface finish, crispness of fill. These are some of the prettiest tires I've ever seen that weren't top of the line Michelins, Pirellis or Bridgestones. I gave them a roll and a sharp eye and saw no wavers vertical or horizontal.
Of course the ultimate issue is price. I don't know how you do it. No store in Jacksonville can come close. Even Wal-mart.
by: NSX07/07/2014
Excellent service, great parts. Thanks.
by: Michael05/24/2022
The first order was great. The second we were missing half of the order. We are missing one U-bolt with nuts, four U-bolt nuts for the U-bolts that were in the package and we are missing both 1" eye bolts and nuts.
3
3
See what our Experts say about this ABS Fasteners Accessories and Parts
- Replacement Locknuts For The Roadmaster Anti-Sway Bars On A 2011 Forest River Georgetown MHI was able to track down some possible solutions for you! I went ahead and checked out the Roadmaster Rear Anti-Sway Bar # RM-1139-149 system, for your 2011 Forest River Georgetown Motorhome, and discovered that this system use both a 5/8" locknut # 6-38, and a 1/2"-13 locknut # 12ZLN. If you have just the Roadmaster Front Anti-Sway Bar # RM-1139-148, then you'll just need the 1/2"-1 locknut # 12ZLN.
view full answer...
Info for this part was:
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.