What our customers are saying:
Product arrived very quickly. Everything was there and fit properly. I'm very satisfied.
Greg
Hillsborough, NC
Videos
for Jeep Storage
Help Articles
Expert Answers
We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve…
The Yakima EXO Swing Away Enclosed Cargo Carrier for 2" Trailer Hitch #Y62VR may or may not cover your tail lights and license plate. If it does, you can add the License Plate and Tail Light Relocation Kit for Yakima EXO System…
I do have an option for you but I cannot advise you combine two hitch adapters together like the Roadmaster Hitch Extender part #RM-071 and the Roadmaster Dual Hitch Receiver Adapter part #RM-077-4 as this would be very unsafe. However, if you need…
The Yakima EasyRider Double Decker Trailer #Y08129 is pretty well setup for off-road situations like you mentioned. It comes with shocks and decently aggressive tread tires so that it would handle moderate off-road scenarios like what most find…
Yakima does not recommend backing their Rack and Roll trailers like the #Y08107 you mentioned into water as the bearings aren't sealed and neither are the electrical connections. Your best option would be to back it right up to the…
Both the LED Trailer Mini Clearance #MCL10AKB and Uni-Lite LED Clearance #MCL11RKB will require an 11/16" hole for mounting. These both use the same Grommet #A11GB.
I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the…
In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for,…
We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video…
The Hellwig 7180 is our part number #HE78RR and the part 7718 is the part #HE26GR which I have confirmed fit your 2015 Tioga Ranger 31D on a E-450 chassis. I sent an update to have the instructions fixed.
If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.
Although most Class V hitches use a 2-1/2 by 2-1/2 inch receiver tube, some like the Curt #C15410 use a 2 inch by 2 inch receiver tube. Before proceeding, you'll need to confirm which you have. Then, you'll need to…
