Trailer Wiring Harness Installation - 2012 Toyota Prius c- Video
Today on our 2012 Toyota Prius C, we'll be installing the Curt Upgraded Circuit Protected Taillight with Converter Hardware Kit with 4 Pole End, part number 56146KIT. To begin with we'll need to go ahead and raise the rear hatch of the vehicle. Now we've already gone ahead and cleaned out the stuff that would be over the spare tire to allow us to remove any of the interior threshold, panels as well as the two side panels. We'll start out by removing the center threshold, to do this we'll use a trim panel removable tool and slide it under and pop it up removing the fasteners. Next we'll need to remove three 10mm bolts from each side. We're going to go ahead and start on the driver's side. With these three screws removed, we can pull the interior panel out. Now we will not be able to completely remove this panel. more
8/11/2014 7:14:13 AM
Filter Videos
Filter Videos
