Trailer Wiring Harness Installation - 2007 Ford Mustang- Video
Today on our 2007 Ford Mustang, we'll be installing the tow ready upgraded circuit protected modulite with 4 pole harness and hard wire kit part number 119179KIT. We'll begin by opening up the trunk of the vehicle. We'll first need to begin by removing this plastic threshold piece here at the back of the trunk. To do this, we'll unscrew the 2 tabs, 1 on each side and lift the center piece out. Now that we've got the center plastic threshold piece out of the way, it gives us the exposure to both the right and left side wiring harness. To unplug, you may simply push in on the locking tab and gently pull apart. We're going to go ahead and unplug them so we can use our test light and figure out which wire does which function for the lighting. Now that we have our test light grounded to the body of the vehicle, we'll go ahead and have someone run through the light functions. Now you'll notice because of the way the lights are set up on this Mustang that you'll have 2 hot wires or 2 live prongs for each of the light functions. For the running lights here on the driver side, we'll have a blue wire with a yellow stripe as well as a tan wire with a red stripe that are both running light functions. more
1/9/2014 7:02:08 AM
Filter Videos
Filter Videos
