Hello neighbors, it's Brad here at etrailer and today we're taking a look at installing the Pollak in-bed seven-pole wiring on a 2020 Chevy Silverado 3500. Now this is gonna be a really great addition if you have a fifth wheel or gooseneck. And when you plug in your trailer, instead of having to drape it over your tailgate, you'll have this wiring right in your bed, making it super easy, and it keeps all your cords inside of the bed as you're going down the road. Now this obviously you have to have a factory seven way to be able to tie into that. It's really just a jumper harness, but it makes it super convenient. It's gonna give you all the same functions as you would your normal seven poles. more
4/22/2024 11:15:45 AM
Curt 7-Way RV-Style Trailer Connector Installation - 2018 Chevrolet Silverado 3500- Video
Speaker 1: Today on our 2018 Chevrolet Silverado 3500 we're gonna be taking a look at and showing you how to install the Curt Seven Way RV-Style Trailer Connector for the vehicle end, and that's gonna be part number C58155.Here's what our seven way wiring connector is gonna look like once we have it installed. We chose to mount it in our truck bed for fifth wheel and Gooseneck wiring, although you can mount it at the back of your car for a replacement or an addition to have your trailer connected. It's gonna have a nice spring loaded door so we're not gonna have to worry about closing it, it'll close on its own as well as a nice seal to keep all the moisture and debris from getting inside of our connector.It's a seven way connector so it is gonna give us all of our lighting functions, brakes, taillights, turn signals, reverse lights, as well as a 12 volt power source and our trailer brakes if we have a controller installed. Nice features it does have that latch like most seven way connectors do so once you plug in your connector and this door closes on top it'll keep it from coming out.Our housing's gonna be made of a durable plastic so it's gonna withstand the elements and it's gonna look good whether it's inside your truck bed like we have here or at the back of your bumper. Overall I just really like the look of the connector. It has a lot of the same features as most of the ones on the market like the door and the gasket but it just has more of a finished look to me, a little bit more rounder edges, and not so much of that blocky square look.I do want to mention that the hardware is not included and any kind of brackets to get it mounted up are not included either, but you can pick up both of those on our website and we have a wide variety of brackets to get it mounted to the back of your bumper or right here in the bed of your truck.Now that we've gone over some of the features and seen what it looks like let's show you how to get it installed. more
11/10/2017 11:20:46 AM
Filter Videos
Filter Videos
