Trailer Brake Controller Installation - 2006 Kia Sedona- Video
Today, on this 2006 Kia Sedona, we're going to show you the Hopkins InSIGHT trailer brake controller, part number HM47297. This is what the brake controller looks like when it's installed on our Sedona. Now, you'll notice there's not all that much to see. We have our hand control right here with our manual override. Our gain control buttons are right here, more power or less power. There's a sensitivity button on the side here. more
9/24/2015 7:11:06 AM
Trailer Brake Controller Installation - 2003 Kia Sedona- Video
Today on our 2003 Kia Sedona well be installing the ETBC7 brake controller install kit and our Tekonsha Prodigy P3 brake controller, part number 90195. Well first need to disassemble the interior of the vehicle to gain access to the wiring. Our first step will be removing the rear threshold. To do this well remove the fastener caps. Once we have the fastener caps out of the way we can then go ahead and remove the Phillips screws fastening the rear threshold. Once we have those out of the way well go ahead and set the threshold aside for reinstallation later. more
1/28/2013 8:40:40 PM
Trailer Brake Controller Installation - 2008 Kia Sedona- Video
Today, on our 2008 Kia Sedona, well be installing the Draw-Tite Brake Controller, part number 5100. Well be connecting with our ETBC-7 install kit. Well also be using the Tow-Ready Universal Mounting Bracket, part number 18136. Our first step will be assembling the 7-pole mounting bracket to the 7-pole connector. Well be using the hardware provided with our install kit. With that completed, we can now go ahead and connect the 7-pole bracket to the tow ready universal mounting bracket. more
8/28/2012 5:10:59 AM
Filter Videos
Filter Videos
