Trailer Brake Controller Installation - 2005 Chevrolet Avalanche- Video
Today on a 2005 Chevrolet Avalanche we're going to install part number C51140. This is a Curt TriFlex Trailer Brake Controller. All right. Now to help us with our install to plug into the factory tow package on our Avalanche, we're going to use part number C51352. This is a Curt Custom Wiring Adapter for trailer brake controllers. We'll go ahead and find our tow package port to begin with. We'll open up the driver's side door and look right behind the parking brake pedal. Well see a small black box with a screw in its center that we have to remove. more
9/16/2014 1:22:52 PM
Trailer Brake Controller Installation - 2013 Chevrolet Avalanche- Video
Today, on our 2013, Chevy Avalanche, we'll be installing the Tekonsha Brake Controller, Part Number 90885. To begin our install, we'll go ahead and mount the brake controller bracket. For this application, we're mounting here on the driver side to the left of the steering wheel. Once we have the bracket or pocket secure, we can then go ahead and locate the manufacturers towing harness. This will be up underneath the dash here on the driver side between the parking brake pedal and the brake pedal. You'll notice there's a white tape going around it, securing it to the manufacturers harness that has a black electrical tape wrapped around it. These wires will be exposed. We'll go ahead and cut the tape and pull the wires down to gain access to them. more
6/11/2013 3:00:02 AM
Filter Videos
Filter Videos
