Roadmaster 4-Diode Universal Wiring Kit Installation - 2021 Toyota Tacoma- Video
Hello neighbors, it's Brad here at etrailer, and today we're taking a look at installing the Roadmaster Diode Wiring Kit on a 2021 Toyota Tacoma. Now there's five main components that are required for flat towing any vehicle, and we'll break those down. The first one is gonna be the base plate, and that's gonna structurally mount to the frame of the vehicle and create a mounting point, not only for your tow bar but the rest of the components. So our tow bar is going to be the connecting point between the base plate and the hitch on the RV. And also, going from the base plate to the hitch, is gonna be our safety cable. So just like you'd hook up to a trailer, you wanna make sure you have those cables in place, just in case of that disconnect. more
2/26/2024 11:04:27 AM
Roadmaster 4-Diode Universal Wiring Kit Installation - 2018 Toyota Tacoma- Video
Speaker 1: Today on our 2018 Toyota Tacoma, we're going to be installing Roadmaster's universal wiring kit for towed vehicles, part number RM-152-98146-7. This style of wiring kit is going to transfer all the signals from your motor home back to your towed vehicle, so that what everyone behind you knows your intentions going down the road. This included your left turn signal, right turn signal, tail lamps and brake lamps. This will keep you DOT compliant in all states.This wiring kit's going to come with everything you need to run the signals from your tail lamp assemblies up to the front, as well as give you a connection point to plug in your six volt connector to hook up your motor home. The diodes that are hooked up here back at the tail will allow it to receive signals from your motor home, but those signals won't be transferred to the rest of your vehicle, as diodes act as a one-way check valve so voltage won't go in that direction. This will keep everything completely separate so you don't have to worry about anything on your vehicle affecting your motor home and vice versa. more
7/13/2018 11:27:52 AM
Roadmaster Tail Light Wiring Kit Installation - 2003 Toyota Tacoma- Video
Today on our 2003 Toyota Tacoma we're going to be taking a look at and showing you how to install the Roadmaster Taillight wiring kit for towed vehicles with LED bulb and socket. Part number RM-152-LED. The reason you'd want this setup is it's just going to be two bulbs that are going to be drilled into the back of your tail lights therefore eliminating any tie in to your factory wiring. You're going to go from the light with our 4 pole flat wiring up into the coach wiring and eliminate cutting into any of your vehicles wiring and not causing any problems if you should still be under warranty it's not going to affect your warranty. If you have any spikes it's not going to affect the vehicle's wiring system at all. Now that's go ahead and show you how to install it. Here's what the kit's going to consist of. We're going to have two bulbs and sockets. This is going to be LED. They're going to be 450 lumens so it's going to be a really bright light. more
8/15/2016 2:37:39 PM
Filter Videos
Filter Videos
