Chevrolet Cobalt Roof Rack Installation And Review Videos

Rhino Rack Roof Rack Review - 2010 Chevrolet Cobalt- Video

Today on this 2010 Chevrolet Cobalt we're going to be test fitting the Rhino-Rack Roof Rack System. It consists of part numbers RRVA118B, which would be the crossbars, as well as the legs, part number RRRLKVA, and then the clamps, part number DK181. This is specific to this vehicle. Now if you look at the bars here at the front which we've already installed, they are aerodynamic, which will cut down wind noise and drag, and both the ends caps as well as the legs themselves are lockable to secure it to your vehicle once you have it installed. Let's show you how the rear one installs now. We kind of have a rear one partially put together. We have the 1 side done already. Now I'll show you the other side. more

4/20/2016 10:26:30 AM

Yakima Q Tower Roof Rack Installation - 2010 Chevrolet Cobalt- Video

Today on our 2010 Chevy Cobalt, well be test fitting the Yakima Round Bar Roof Racking system, part numbers Y00408, Y00722 and Y00124.Now with our crossbars and feet already assembled, we'll first open up the drivers side and passenger side doors of the vehicle and place the first crossbar onto the vehicle.Then, according to Yakimas fit look up or the included instructions, we will measure from the first part of the glass to the first part of the foot. We will need to measure both the passenger and drivers side of the vehicle to ensure that the crossbar is perpendicular.Once we have established this measurement, we can turn the bolt in the inside of the tower and tighten down the lever to secure the crossbar to the vehicle. It is important to tighten down each side a little bit at a time so one tower does not favor one side of the vehicle. After clamping it down, the crossbar is secured to the vehicle and we'll go ahead and close the doors and were ready for our rear crossbar.We'll open up the doors of the rear of the vehicle, place the rear crossbar on top of the vehicle and again according to Yakima fit look up or the included instructions, we'll measure the crossbar spread. Now the crossbar spread is an important measurement when choosing roof rack accessories. We'll measure from the center of the front crossbar to the center of the rear crossbar and we'll do this for both the passenger and drivers side of the vehicle. more

3/20/2013 2:59:39 PM

Rhino-Rack Aero Roof Rack Installation - 2009 Chevrolet Cobalt- Video

Today on our 2009 Chevrolet Cobalt Two-Door, we'll be test fitting a Rhino Rack Roof Rack System. We'll be using the DA118 Bars and the fit kit for our vehicle is part number DK182. Now, the bars are also available in black and that's part number DA118B. We've already got our roof rack assembled according to the instructions and now we're ready to fit it up on the vehicle. First thing we need to do is open our doors. We'll take our front bar assembly and set it up on top of our roof. more

10/19/2012 1:36:20 PM

Rhino Rack Aero Roof Rack Installation - 2010 Chevrolet Cobalt- Video

Today on this 2010 Chevrolet Cobalt we're going to be test fitting a Rhino Rack Roof Rack System. We already have our crossbar assemblies put together according to the instructions so now we're ready to mount them up on top of the vehicle. The first thing we need to do is open both front doors. Next we'll take our crossbar assembly and lay it up on top of the roof. We'll measure from the center of the seam where the two doors meet to the center of the front bar. This measurement needs to be 250 mm or 9,27/32". more

12/30/2011 3:13:18 PM