Diversi-Tech Adapter Sleeve Installation - 2013 Ford F-250- Video
Today on our 2013 Ford F250 Super Duty, we'll be test fitting the stainless steel adapter sleeve with hitch lock for Diversi-Tech 2 inch locking ball mounts, part number DTADP35. This adapter sleeve allows you to use your Diversi-Tech locking ball mount with a 2 inch and a 2 1/2 inch receiver. If you have multiple work vehicles, this will allow you to easily transfer one ball mount from one vehicle to the next vehicle. We'll begin our test fit by sliding the sleeve into the 2 1/2 inch opening of our vehicle. We'll then take the included hitch lock, which we'll slide into the hole closest to the vehicle through the hitch. We'll then lock it on the other side. We'll now use one of Diversi-Tech's 2 inch locking aluminum ball mount, which we will slide into the sleeve and line up the holes of the ball mount into the holes furthest away from the vehicle's sleeve. more
8/21/2014 4:00:27 PM
TorkLift SuperTruss Hitch Extenstion Installation - 2005 Ford F-350 Super Duty- Video
Rate your transcript OrderClientKevin BrossRef #20534Order #TC0622249609 Today our 2005 Ford Super Duty F350 well be installing the Torklift Super Truss Hitch Extension, part number TLE1532. This will work with the previously installed Torklift Super Hitch. Now note, the Super Hitch has already been previously installed is the magnum version which has a 2 and a half inch top receiver tube. Weve got a bushing thats already inside the hitch and well slide our extension into the bushing. Well line up the hitch pin holes then install our pin and clip. Now well install the lower compression tube into the bottom of our hitch. Again, well line up the hitch pin hole, install our pin and clip. Next were going to install 2 collars; one towards the front and one towards the back of our hitch extension. more
8/14/2014 11:24:37 AM
Reese Titan Hitch Reducer Sleeve Review - 2013 Ford F-250- Video
Today on our 2013 Ford F250, well be test fitting the Reese Titan Reducer Sleeve, part number 58102. Now this adapter allows you to quickly and easily convert your 2 inch hitch receiver to a 2 inch receiver, allowing you to carry ball mounts, cargo carriers, or any other 2 inch hitch receiver accessory which uses a standard 5/8 hitch pin. Well begin our test fit by sliding the adapter into the opening of our hitch. Well then slide in our 2 inch accessory, align the pinholes, and install our pin and clip, and with that, thatll complete todays test fit for the Reese Titan Reducer Sleeve, part number 58102, on our 2013 Ford F250. . more
9/25/2013 1:52:47 PM
Filter Videos
Filter Videos
