Trailer Wiring Harness Installation - 2004 Infiniti FX35- Video
Speaker 1: Today on our 2004 Infiniti FX35, we're going to be taking a look at showing you how to install the Tekonsha ZCI circuit protected vehicle wiring harness with four pole flat trailer connector and insulation kit, part number 119250KIT.Now, this is what our four pole looks like when it's installed. When it's not in use, you can stow it away in a side pocket over here in the side of the vehicle. And when you're ready to use it, you just drop it out the back. You want to make sure you go over top the rubber seal here. Stay away from your locking mechanism from your door, and go ahead. Close it into place.We've got more than enough wire here to connect to our trailer. more
8/23/2017 11:27:26 AM
Trailer Wiring Harness Installation - 2010 Infinity FX35- Video
All right today on this 2010 Infinity FX35 were going to install part number 118477 from Tow Ready. The first thing were going to do is go ahead and open the back hatch and remove the interior trim panels. We also will have to remove the cargo loops so we can move the trim panels out of our way. Then starting on our drivers side we will locate the vehicles wiring harness. We will separate this connector and install the tee connector with the yellow wire. Then we will go ahead and route the tee connector with the green wire underneath the threshold and over to the passenger side. more
9/27/2013 8:15:35 AM
Filter Videos
Filter Videos
