Durabilt E-Track Shoring Beam Review Video

7-Way connectors like the #A7WCB that you referenced should be wired by function and not color. Since trailer manufacturers can sometimes use non-standard color wires for the taillight functions of their trailer it is best just to determine the…

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

Since your 2013 Toyota Tacoma has a factory tow package, including a 7-way connector at the back bumper, it will have a brake controller connector. While it is usually visible above the emergency brake pedal, it may sometimes be taped or zip-tied to…

The 2015 Toyota Tacoma is part of the third generation of this vehicle and the location of the brake controller connection port is behind the left kick panel, near the emergency brake pedal. Please refer to the linked video at the :20-second mark for…

I went out into our warehouse and measured the distance from the ratchet mechanism to the e-track fastener of the Snap-Loc E-Track Tie-Down Strap #SLLS28RER and found that it measures 7-1/2 inches.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

It looks like the interior of the switch was damaged. It's not a big deal assuming it's an electric breakaway system. You can just replace the switch assembly very affordably. The switches use two wires to connect, so they're not system…

I do have a solution for you, but the Fat Bike Adapter Kit for Curt Platform Bike Racks Item #C18091 will not fit on your Swagman XC 2-Bike Platform Rack #S64650. Instead, why not use Swagman's very own Fat Bike Adapter #S64674? This is labelled…

We do have a couple different spare tire mount options for you to check out. You could go with the Spare Tire Carrier for E-Track Systems, #RA-16HST, that you referenced, but you will also need an E-Track rail. For this I recommend the 4 ft Vertical…

The correct product to use to support the boards you plan on using to support the bed would be the E-Track Wood Beam Socket #59149. Since you will want to have the 2 by 4s on edge to support the plywood, and the only way the #59149 could be installed…

You do not want to use a holding tank heater like ThermaHeat #277-000164 on a battery but we do offer battery heaters specifically intended to protect one from extreme cold. You can see all such items on the page I linked for you. You'll want to…