Curt Class II Euro Style Drawbar Review C45592 Video

The best hitch for your 2023 Honda HR-V is going to be the Curt Trailer Hitch item #C68DR. This hitch is custom fit and bolts to your Honda with included hardware. I really like this hitch because it mounts between the bumper bar and your bumper…

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

I recommend the Curt Trailer Hitch Receiver #C68DR for your 2023 Honda HR-V, due to Curt's deserved reputation for quality. If you need a wiring harness as well, the correct fit for your '23 HR-V is the T-One Vehicle Wiring Harness #118673…

If you are measuring to the top of the coupler then I will have to ask for the measurement to the bottom of the coupler instead. This is because the coupler covers the ball so the measurement to the bottom of the coupler provides a more accurate…

The Curt T-Connector #C56313 is designed to work on the Premier Trim of the 2019 Chevrolet Malibu. For your Malibu LT I recommend the Curt T-Connector #C56387. This one is confirmed to fit your vehicle and work with the options that are included.

I've linked our selection of Class II ball mounts for you to take a look at. You can use an adapter to increase the tube size to a 2 inch, like #HTAD, however this is going to reduce the weight capacity of the Draw-Tite Trailer Hitch Receiver…

The recommended 2 inch Euro style ball mount for Curt trailer hitch #C11352 on a 2015 Nissan Altima is #C45572. I went out to the warehouse and pulled one to take some measurements. From the center of the pin hole to the part of the shank where it…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

For the 2016 Volkswagen Golf GTI we have the Curt hitch part #C11412 that is listed as a fit that would work well. Currently it is the only option for the GTI models so it would be your only option that we offer. I attached an install video for you…

The distance from the center of the pin hole to the end of the shank that slides into the hitch is 1-7/8 inches.

The Thule Velospace xt3 requires a 50mm Hitch Ball #EH53C-C. If you have a 2 inch hitch receiver you will need a mount like this one #BH20 or this one #C45015 for an 1-1/4 hitch.

The European version of the Thule EasyFold XT Bike Rack is designed to mount to a 50mm hitch ball like the Brophy #EH53C-C. I have attached a link that will also take you to our selection of 50mm hitch balls that you can look through.