Trailer Wiring Harness Installation - 2001 Dodge Ram Pickup Video

To install a 7-Way harness on your 1996 Dodge Ram without the factory connector, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt…

We have all of the wiring you need for your 1996 Ram, but there is no all-in-one harness available. First I recommend part #HM40975-11998. This is a 7-pole and 4-pole trailer connector with the bracket and wiring. This will hardwire to the existing…

The Chevy 5 bolt pattern can mean a couple different patterns. The part #84546UC3 is the very common trailer bolt pattern of 5 on 4-1/2 inch. The other common bolt pattern associated with Chevys is 5 on 5 inch like the part #AKHD-550-35-K which would…

The Universal Wiring Harness w/ ModuLite and Brake Controller Harness part #22551 will work to add a 7-way to a 1996 Dodge Ram. This kit comes with everything you need for the above and you should not have to extend any wires. In order to have both 4…

Your truck does not have the factory tow package wiring so you'd need to go a different route to complete the trailer wiring. You'd need the 4-way kit part #C55329 to provide the trailer wiring and then you'd need to convert to a 7-way…

If your 1997 Dodge Ram 1500 had a tow package with a 7-Way connector from the factory, then your truck is pre-wired and will have a port underneath the dash to attach a brake controller. If the truck came with a 4-Way connector tow package, it will…