Draw-Tite Max-Frame Trailer Hitch Installation - 2018 Subaru Forester Video

For your 2018 Subaru Forester XT I recommend the Draw-Tite Class III Max Frame Receiver Hitch #76182 because it features a hidden design where only the receiver is visible beneath the vehicle. This provides you with a clean, OEM appearance unlike…

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

The etrailer.com Trailer Hitch #E98847 is a better option than the Draw-Tite Trailer Hitch #75673 for your 2019 Subaru Outback for one simple reason: clearance. The hitches will be the same in terms of installation but as you can see by the linked…

The differences that you noted between the Draw-Tite trailer hitches #75876 and #76182 for your 2018 Subaru Forester are spot on. Both are custom hitches so no drilling is required (although you may need to enlarge some access holes) and they both…

If you check out the attached photos of the EcoHitch Hidden Trailer Hitch Receiver #306-X7216 and the Draw-Tite Max-Frame Trailer Hitch Receiver #76182 you can see that they sit in relatively the same place. I went out to the warehouse and found that…

The crosstube on the Draw-Tite #76209 actually lines up with the trailer hitch receiver so is not hidden like the Curt #C13382. The only other 2 options for your 2019 Subaru Crosstrek that feature a hidden crosstube are the etrialer.com #e98912 which…

We have the Draw Tite hitch part #76182 which is a confirmed fit for your 2018 Subaru Forester which would be our most hidden option. It will only have the opening of the hitch visible below the rear bumper which will give you the least visible…

The Draw-Tite Max-Frame Trailer Hitch Receiver #76182 weighs right at 35 pounds. The EcoHitch Hidden Trailer Hitch # 306-X7216 is just a tad heavier at 37.5 pounds. Both hitches are confirmed to fit your 2018 Subaru Forester and feature a similar…

When we installed the Draw Tite hitch part #76182 on a 2017 Subaru Forester we found that there was 16 inches from the top of the hitch tube to the ground.

The hitch we offer for your 2015 Subaru Forester that would be the least visible would be the Draw Tite part #76182 that you referenced since only the hitch opening will hang below the rear bumper as opposed to the crosstube of the hitch. I was able…

The Curt Trailer Hitch Receiver part #CU64FR and the Draw-Tite Max-Frame Trailer Hitch Receiver part #76182 will have a concealed look therefore only the receiver tube opening will be shown once installed. In regards to the heat shield, this must be…