Draw-Tite Trailer Hitch Receiver Installation - 2018 Lexus GX 460 Video

Yes, the Draw-Tite Trailer Hitch #75685 will absolutely fit a 2015 Lexus GX 460; if you take a look at the accompanying photo you can see the hitch installed on a GX 460 This is a Class III, 2" trailer hitch that has a 5,000 lb towing capacity…

The Draw-Tite Max-Frame Trailer Hitch Receiver #75685 is 9-1/2 inches wide at the mounting plate.

Both the Draw Tite hitch part #75685 and the Curt #C13043 that fit your 2017 Lexus GX 460 are really great options that would work well for what you are planning on doing. The powder coat of the Curt will last a bit longer than the Draw Tite but…

The trailer hitch I highly recommend for your 2019 Lexus GX 460 is the Draw-Tite Trailer Hitch Receiver #75685 because it is a simple, bolt-on installation that does not require any special tools to install, simply a 19mm wrench. As you can see by…

The trailer hitch receiver we have for your 2014 Lexus GX 460 that sits closest to the bumper is the Curt Trailer Hitch Receiver part #C13043. I have attached a photo of each hitch on a similar Lexus to give you a better idea of how far it will stick…

I would be happy to help you find those parts and set your 2018 Lexus GX 460 up for towing your Winniebago Hike Trailer. There are a couple of class III hitches that are available for your Lexus but no class IV hitches available. This won't be a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…