Roadmaster Direct-Connect Base Plates Installation - 2020 Jeep Cherokee Video

Hey Erik, so what you've got left apart from the Roadmaster Falcon #RM-522 that you already have is a base plate, a braking system, and a wiring kit. For a base plate kit, I recommend going with the Blue Ox Base Plate Kit #BX1110 using the Blue…

Thank you for the photo and from that it looks like you have a 1/2 inch fitting, which is common for the hose coming from the propane system on your trailer. However, there are not extensions with a 1/2 inch fitting so we have replacement hoses of…

Yes, you can do this, but to be clear, we will add a Tee fitting that will allow you to use your onboard propane tank and an outdoor 20 pound tank. You cannot use this to refill or add to the primary onboard tank. You can use the JR Products…

The MB Sturgis Propane Adapter Hose - 3/8" Male NPT x 1/2" Female Flare Swivel uses a 3/8" fitting on the regulator side and 1/2" fitting on the manifold side. These are nominal fitting sizes so they don't actually measure…

I looked at an owner's manual for a 2014 Compass online, because it's midway through the model year span you mentioned and saw that manual transmission equipped Compass models can be flat towed with the ignition in the ACC position and the…

The Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item #RM-521451-5 is going to attach to the front of the frame where the red tow hooks are on your 2021 Jeep Cherokee Trailhawk and will require you to remove the front fascia. I have…

I did some research and what I believe is happening is that your motorhome has combined lighting and your Jeep has separate and the brake lights are overriding the turn signal lights. I contacted Roadmaster and they recommend to use the Roadmaster…

The first thing you'll need to flat tow your 2020 Jeep Cherokee Trailhawk is a base plate kit confirmed as a fit for your vehicle. For that I recommend the Roadmaster Direct Connect kit part #RM-521451-5 as it's easy to connect to and also…

The Replacement LED Monitor Light part #SM99612 has two connections, the red wire which will splice into the stop light switch circuit (or breakaway if stop light switch circuit is not active) and the black wire will splice into the black wire…

Yes. You will need to purchase and install Mopar flat-tow wiring kit 68321424AB before flat towing your vehicle, as per Jeep tech bulletin (08-010-17). This kit is available at your local Chrysler and Jeep dealership. I've attached a photo of the…

If you are referring to the Mopar harness that fixes the steering stability issue, then it was resolved by Jeep starting with the 2018 models so you won't require it. For lighting, you can use a Mopar wiring kit if desired, but there are other…

I would be happy to assist you in a list of parts needed to flat tow your 2020 Jeep Cherokee Trailhawk. A complete flat towing setup includes a tow bar, safety cables, base plate kit, vehicle tow bar wiring, a supplemental braking system, and…