SMI Air Force One Braking System Installation - 2013 Jeep Wrangler Video

Yes, there is a way to install just the portion of the SMI Air Force One that you'd need in a second vehicle. For that all you need is the Replacement Towed Vehicle Installation Kit #SM99226 that you referenced.

The brake controller you mentioned is utilized when towing a trailer or a tow dolly, but when you flat tow a vehicle a different system is used that will utilize your motorhome lights but will also utilize the braking inside your towed vehicle. For…

Since the diameter of your tire size 365/70R22.5 is 42.5 inches the Adco Ultra Tire Gard RV Wheel Covers part #290-3956 would fit and work great since they fit diameters between 43 and 45.

The big difference is the corners of the main panel of the #FV807357 are cut out with small section to allow access to mounting hardware and the #FV807359 instead does not have this area cut out. So you'd want to look at your vents to see if you…

Yes, the Blue Ox Tow Bar Wiring Kit, #BLU79FR will work for your 2021 Jeep Wrangler Unlimited. This kit is a custom fit for the 2020 through current model Jeep Gladiator, and the 2018, through the current model Jeep Wranglers with, or without the tow…

For trailer wiring the Hopkins kit part #HM56202 is a confirmed fit. If you use a supplemental braking system like the Blue Ox Patriot part #BLU37TR which depresses the brake pedal you then would want the part #RM-88400.

You can use a tow bar like the Tow Ready #63180 to tow your 2004 Wrangler, but keep in mind, the tow bar is NOT rated for speeds above 45 mph, so I'd recommend a different setup. In order to run at highway speeds, I recommend using a tow bar like…

The Warner Air Utility Brake Controller part #HA100400C that you referenced is designed to allow vehicles with air brakes to control the brakes of a trailer that are electric. If that describes your setup then this will work well for you.

The Gen-Y Adjustable Ball Mount part #325-GH-1723 does fit the 3 inch hitch size of your 2014 Dynamax DX3. Based on the weight and towing capacity of your RV you would not need weight distribution for your trailer.

For a complete flat towing setup on a 2018 Ford F-150, you will need a number of components, including base plates, a tow bar, safety cables, wiring for indicator lights, and a supplemental braking system. While we carry the Blue Ox brand for many…

We do carry an adapter for Jeep D-Ring bumper mounts, the #RM-035-1 and #RM-035. However these are for Roadmaster tow bars such as the Sterling All Terrain, Non-Binding Tow Bar, #RM-576. Currently there is not a D-Ring bumper mount for the etrailer…

The Roadmaster D-Ring adapter part #RM-035 will fit on the Roadmaster Nighthawk #RM-676 tow bar that you also referenced.