Alright we will get started by lowering the exhaust. These rubber hangers here will need lubricant sprayed on them to make it easier to get them off. Before we lower the exhaust we are actually going to put a safety strap underneath here so we can control the exhaust as we lower it. See how we can control it.… see more >
Videos
Help Articles
Expert Answers
The easiest to install trailer hitch for your 2020 Toyota Sienna is the etrailer part #e98837 which has the shortest install time listed. I attached an install video for this for you to check out as well. Then for trailer wiring the easiest…
view full answer...The Kuat NV 2.0 #NV22B measures 55-1/8 inches wide overall, folded or unfolded. The height when folded is 25-3/4 inches. When unfolded it is approximately 13 inches tall. When unfolded the rack is 37-3/8 inches front to back. When folded up it is…
view full answer...Yes, the etrailer Hitch item #e24AR has an similar if not the same installation method as the Curt Trailer Hitch item #C12083. This hitch is confirmed to fit your 2015 Acura RDX. I have linked an installation video below for the Curt Trailer Hitch…
view full answer...I went ahead and contacted my tech at Torklift (the makers of EcoHitch) about the #EH97FR, and he confirmed that all M12 hardware will be torqued to 70 ft/lbs and all 1/4" hardware will be torqued to 8 ft/lbs. I went ahead and attached the…
view full answer...The Kuat NV 2.0 Base Bike Rack for 2 Bikes #BA22B comes with the cable locks and hitch pin lock keyed alike so you would only need 1 key for your lock. It sounds like you swapped out the hitch pin, this would cause the cable locks to no longer be…
view full answer...There is definitely a bike rack that will work for you, but the first thing you'll need is a hitch if you do not already have one. I recommend the Draw-Tite #36297, which is a Class II hitch with a 1-1/4" receiver that is confirmed to fit…
view full answer...I double checked just to make sure and there is not a hitch with a 2 inch receiver available for your 2004 Volvo XC70. Both hitches available for your vehicle, the Curt #C12318 and Draw-Tite #36297 have a 1-1/4 inch receiver and are Class II rated. I…
view full answer...The Draw-Tite Trailer Hitch Receiver part #36297 which is a fit for a 2007 Volvo XC70 (All Models) does not come with hardware. That said, you won't need to obtain any either as it uses existing bolts already on the vehicle.
view full answer...All of the available trailer hitches for a 2004 Volvo XC70 are class II hitches with a gross trailer weight capacity of 3,500 pounds and a tongue weight capacity of 300 pounds. If the combined weight of your horse and trailer (loaded and ready to…
view full answer...In terms of quality both etrailer and Curt make very reliable trailer hitches and honestly neither is going to wilt under the elements in the northeast U.S. When choosing a hitch what people generally look at is capacity and, like you asked, if…
view full answer...You sure can. I've attached the picture of the Curt #C13409 on your 2021 Subaru Forester. I've also attached a video of the complete install. So now you know what it looks like and how to get it on there.
view full answer...This is not a normal fit for the Draw-Tite #75270 on your 2008 Honda Odyssey. I reached out to my contact at the manufacturer and they said that is a big hitch and it can get tweaked side to side. If it is that side to side that isn't lining up,…
view full answer...