Customers compare TPMS-TRAILER to these similar products
Products Featured in this Video
Today we're going take a look at the TireMinder Solar-Powered TPMS for dual axle trailers, with this LCD monitor. Now this is a solar-powered TPMS that'll let you monitor your trailer's tire pressure and temperature, via this dedicated LCD monitor. The sensor range is perfect for dual axle trailers up to 25 foot long. This part does include everything laid out here on the table. It includes the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I had a hard time finding a lot of information using the two part numbers you found both on the lens and the light base. It looks like the base number may refer to the Optronics Trailer Light #MC32AB, for which the correct replacement lens is part…
view full answer...Yes the TireMinder TPMS for Dual Axle Trailers #TPMS-TRAILER that you referenced can be used with rubber valve stems and less than 60 psi as it is rated for up to 70 psi.
view full answer...The only time you'll need to change out your tire stems to use the TireMinder TPMS for Dual Axle Trailers #TPMS-TRAILER is if they are in bad shape and need to be changed out anyways. I reached out to my contact at TireMinder and he said that…
view full answer...The Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel #AM30130 is not balanced as trailer tires don't require balancing like passenger tires do - this is common practice for trailers. If you'd like to have them balanced…
view full answer...The Tireminder TPMS part #TPMS-TRAILER uses the 433 MHz frequency. If there was a tire pressure loss there would be an alert sent to the monitor.
view full answer...You can use the Camco Single Stage Propane Regulator - 200,000 Btu/Hr #CAM59013, which is a fairly standard replacement regulator and will work well to replace your KLI 9000 since it is designed for low pressure items as it maintains a constant…
view full answer...Yes the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM38FR will work great on rubber valve stems. It is designed to work on rubber, steel, chrome, or nickel valve stems.
view full answer...The 7-way on your trailer could be wired correctly as-is. Not all 7-ways will have wires run to every one of the pins. Typically, if there are only 5 wires you will be missing the circuits will be the 12-volt accessory and the reverse light circuit.…
view full answer...Yes, the booster on the TireMinder i10 TPMS for RVs and Trailers item #TM89FR is easy to hook up and will work great with your 6 volt batteries, so long as they are wired in series. The tireminder alligator clips will attach to the outside post of…
view full answer...Tireminder recommends installing the signal booster like what comes with the part #TM89FR close to the middle of the towing rig and as far to the outside as possible. So for a fifth wheel trailer setup you'd want to install it as close to the…
view full answer...The #NCTP100 iN-Command TPMS system would alert you immediately once the pressure or temperature in any of the sensor-equipped tires deviates from the parameters you've programmed into the system. A blowout would cause a quick decrease in tire…
view full answer...The Booster for the TireMinder TPMS for Dual Axle Trailers #TPMS-TRAILER uses a very low draw of power. If you use the trailer often there will not be an issue with having the booster hard wired. If your trailer will sit for long periods of time I do…
view full answer...