Customers compare RM-8700-9530 to these similar products
Products Featured in this Video
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I reached out to Roadmaster and the reason your Older Roadmaster Invisibrake #RM-8700 requires the #RM-8700-9530 is that it was made before the monitor 9530 was made, and the adapter has a built in microchip that regulates the voltage to the #RM-9530…
view full answer...Yes the Roadmaster InvisiBrake Supplemental Braking System Item #RM-8700 will connect directly to your towed vehicle's battery and charge it while driving unlike most braking systems that would actually drain your battery. Some notes to consider…
view full answer...The #42615 is a trailer wiring harness so would not be what you'd want for a flat towing setup. For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your…
view full answer...The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, #HM56104 is not confirmed for the 2011 Jeep Wrangler Unlimited (It fits GM vehicles); you need the Hopkins part number, #HM56200. This harness requires no cutting, splicing into your…
view full answer...The tow bar wiring I recommend for your 2014 Wrangler is the Hopkins Custom Tail Light Wiring Kit, part #HM56200. This system is not used with the 4-way connector you have on your Jeep for towing. Our installers have found that the trailer towing…
view full answer...I have a great option but the Roadmaster Tail Light Wiring Kit for Towed Vehicles part #RM-152-LED is not a confirmed fit for your 2008 Jeep Wrangler JK Sahara edition. It comes down to the inserts being too long and interfering with the standard…
view full answer...For the Roadmaster InivisiBrake monitor part #RM-9530 you'd wire it to your Invisibrake by running the black wire to ground, the red wire to 12 volt power, the yellow to the breakaway switch, and the blue wire to the brake light switch. I also…
view full answer...The Roadmaster Universal Brake Monitor #RM-9530 is just the monitor. It is designed to be used in conjunction with a braking system like the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The arm that you are seeing would be included…
view full answer...In order to use the Roadmaster InvisiBrake Supplemental Braking System part #RM-8700 on a 2019 Jeep Wrangler Unlimited you'll need the Roadmaster Stop Light Switch Kit part #RM-751490. This will allow you to send a signal to the monitor in the…
view full answer...In the installation instructions for the Roadmaster BrakeMaster #RM-8700 there are two fuses wired to the air compressor circuit. One 20 amp fuse on the power wire of the battery, and a 10 amp fuse connected on the blue wire that runs from the…
view full answer...You can add a BrakeBuddy charge line kit part #BB54FR to your flat tow setup that is using an Invisibrake part #RM-8700 and it wouldn't interfere. It would put an additional charge on the battery like you are wanting.
view full answer...Yes, the the Roadmaster Tail Light Wiring Kit with Bulbs, #RM-155 can be used with the Brake Buddy Classic 3, #HM39494. We actually have an install video created for the Brake Buddy Classic 3, #HM39494, see link below. This is located on the product…
view full answer...