Customers compare 126B2 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Dexter Single Axle Heavy Duty Suspension Kit #K71-403-00 technically will not have a torque specification. However, I have been asked this before and was informed by Dexter that what you need to do is tighten them down to the point of either…
view full answer...All of the components of the Dexter Single Axle Heavy Duty Suspension Kit #K71-403-00 are zinc plated which is great for marine applications.
view full answer...Nope, heavy-duty shackle straps are either 2-1/4" or 3-1/8", so the closest heavy-duty shackle strap to 2-3/4" would be the the 3-1/8" long, 1/2" thick Dexter Heavy-Duty Shackle Link #DX55FR. This option…
view full answer...The standard diameter for trailer leaf spring bolts is 9/16 inch which is why the part #E4139 and all similar options have this hole size. We don't have anything with a smaller diameter but my guess is what you have is actually 9/16 inch.
view full answer...The mounting holes on the T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer part #37210324 are spaced 1" horizontally x 2-1/4" vertically apart on center.
view full answer...If you are using 9/16 inch shackle bolts which are the most common you will want 65 to 95 foot pounds of torque. If you are using 1/2 inch then go for 45 to 70 foot pounds. And for 5/8 inch bolts use 100 to 120 foot pounds. All of these components…
view full answer...We have leaf spring bolts that were made specifically with features for the leaf spring application like the part #126B2. This is the correct size has a knurled section right below the head of the bolt which helps with install and has a grease…
view full answer...The shackle links of the #K71-403-00 are 3/8 inch thick.
view full answer...Wet bolts like the part #126B2 aren't as important to be used if the bushings are nylon but if you wanted to use them you certainly can.
view full answer...The Dexter Single Axle Heavy Duty Suspension Kit #K71-403-00 uses the Shackle Bolt #007-126-01. The 9/16" portion of this bolt is 2-1/4" long.
view full answer...Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…
view full answer...In order to retain the same suspension geometry, when you replace shackles you should use the same length replacements. Going with a shackle that is too short will not allow enough articulation in the suspension, and cause a very rough ride. Using a…
view full answer...