Customers compare LPL31CB to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Great questions Jimmy, We haven't had any reports of the LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn #DG52720PB having issues with hyper flashing so you should be good to go in those regards. When it comes to power draw, the tail light…
view full answer...There are several items you might want to try using for removal of corrosion in your 7-way trailer connector, like part #HM48480. White Vinegar A wedge shaped, slip on pencil eraser or art gum eraser Pipe cleaners PB Blaster If the corrosion is…
view full answer...Yes we do! The LED light that is comparable to the Bargman 40-06-001 and the Optronics #ST70RB that you referenced is the part #STL002RB with the staggered 3 pin connection. We also have the kit #TLL12RK which comes with the same size lights,…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…
view full answer...Two-wire LED clearance lights such as the Red #MCL32RB or the Amber #MCL44AB have one wire for the power lead and one ground wire. The wire that was attached to your old clearance lights will be spliced to the power wire of your new lights. The black…
view full answer...You definitely could use the Thinline LED Trailer Tail Light #STL59RB as a standard trailer stop/turn/running light on the sides of your trailer as all of those functions are supported on this light. If you check out the picture I attached you can…
view full answer...I believe I have just the right license plate bracket for you. Take a look at the Trailer License Plate Mount Bracket, #LP15SB. It is just a little over 8 inches long at 8-7/16 inches. It is 4 inches tall. The center to center distance between the…
view full answer...The size of the nuts that fit the posts of the Trailer Wiring Junction Box #3375601101 is M5-.8 pitch. This does not come with extra nuts.
view full answer...The ring terminal size you need for the posts of the junction box part #3375601101 that you referenced is 3/16 inch like the part #44-5310A which would work great. The terminal matches the correct ring size and also is designed for 10 to 12 gauge…
view full answer...It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
view full answer...I have included a link to the submersible license plate lights that we offer. If you are looking for an LED light, take a look at part #LPL91CB. I have included a short video for you.
view full answer...The light that indicates that the 12 volt circuit is hot is normal and it will not drain the battery. Think of it as the battery having a really long positive terminal that just extends to the rear of the vehicle. If nothing is drawing power from it,…
view full answer...