Review of Lippert Components Trailer Leaf Spring Suspension - Correct Track Axle Hanger - LC303917 Video

Personally Russ, if you are planning to keep your 2018 Grand Design Momentum 351M toy hauler and want to benefit from a better ride then upgrading to the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2570 makes the most sense. If you…

The hole in the yellow octagon is offset from the center which when installed in the slotted hanger like the part #LC303918 gives you the ability to set an exact alignment with the other sides hanger but using the same configuration by simply…

I reached out to Roadmaster about the Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 you are looking to install. While they are unable to give exact numbers for the length of travel on the leaf springs the shocks do have 5-1/2"…

For your 2018 Heartland Road Warrior Toy Hauler you will need a Correct Track Replacement Hanger. We have them 4" Tall #LC303917 or 5" Tall #LC303918.

Yes of course. The Replacement Lippert Components Correct Track Weld-On Axle Hanger part #LC303918 you mentioned is 5" tall x 3-1/2" wide x 3-1/4" deep and the two mounting holes on the top are 1-3/4" apart on center as shown in…

I can confirm that the correct part for you is the Replacement Lippert Components Correct Track Weld-On Axle Hanger #LC303918. When I reached out to Lippert they told me this hanger measured exactly 4.93 inches long x 3 inches wide x 3.3 inches.

The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR are the new upgrade to their counterpart - the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailers MR47ZR. According to MORryde, the AllTrek has been through more intense…

We have a front leaf spring hanger that was designed for 2 inch wide slipper springs with the part #721584.

By far the best gooseneck ball kit for your 2019 Ford F-350 with the factory gooseneck ball hole is the B and W kit part #BWGNXA2061. The ball comes with a handle which allows you to pick it up without having to grab a greasy ball and the safety…

The correct replacement breakaway cable kit for the Dexter brake actuator part #T63FR that you referenced is the part #DX76XR.

Since both the 7k Roadmaster Comfort Ride system #RM-2460-2570 and the 8k version part #RM-2460-2580 are designed for 3 inch axles you can use either and in your case the 8k version would be perfectly compatible and give you a little more suspension…

The Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2570 and the Lippert Components Center Point by Trailair Air-Ride Suspension Upgrade part #LC1565391 are both excellent options. That said, it is really hard to beat the…