Customers compare 34466N4BB96GM to these similar products
Products Featured in this Video
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Remove the locknut from the cable housing assembly of the #34466N11AB96GMA. Feed the cable through the mounting bracket or hold in the wall of chassis. Feed the locknut back over the cable and fasten securely to the backside of the bracket or wall.…
view full answer...Unfortunately LaSalle Bristol completely covers the connection point in plastic so the only way to gain access to gate inside the LaSalle Bristol Cable-Actuated RV Waste Valve #34466N4BB96GM would be to cut into the plastic for the cord and…
view full answer...No they will all mount differently. For example, LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable, part #34466N4BB96GM, needs ABS solvent cement, part #3447530889, to secure the valve to your sewer…
view full answer...Going with the larger diameter 225/75-15 tires would move the top of your tire around a 1/2 inch closer to the underside of the trailer. Since we usually like to see at least 3 inches of clearance with the trailer loaded per usual I really…
view full answer...The LaSalle Bristol Cable-Actuated RV Waste Valve, #34466N4AB120GM is not designed to be trimmed. However, there are multiple lengths available: - 36" Cable #34466N4AB36GM - 48" Cable #34466N4AB48GMA - 72" Cable #34466N4AB72GMA -…
view full answer...It would be possible if you are willing to remove just the center section of the #34466N4AB96GMA and what you have now. The center portion would bolt right up to the flanges you have currently.
view full answer...The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part #BK3-210 which has a 2.125" seal or the Bearing Kit part #BK3-200 which has a 2.250" seal. Unfortunately, this axle could have come…
view full answer...In order to fix your loose cable on your LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank #34466N4AB36GM, you will need to tighten the set screw that holds the cable to the valve stem. To do this. you're going to need to first…
view full answer...The LaSalle Bristol Cable-Actuated RV Waste Valve #34466N4AB36GM will come with gaskets in between the valve and spigot/hub fittings, which I do recommend swapping over as well as these are the most easily worn components. Doing the install this way…
view full answer...Yes, Bristol is just the manufacture of the product. As long as the opening diameter and fitting type is the same then you can absolutely use one in place of the other. Unfortunately, we do not carry Bristol products but I have attached our waste…
view full answer...According to Jensen, resetting the stereo should fix your problem. Just to the right of the CD/DVD eject button is a small hole. If you straighten out a paper clip and push it in that hole, there's a small reset button. Press the button and the…
view full answer...To install the Valterra Cable with Valve Handle #TC72PB you will need to simply follow the instructions that are included in the packaging: Remove the locknut from the cable housing assembly. Feed the cable through the mounting bracket or hold in the…
view full answer...